Control Products HC-110 Series Quick Start Manual

General Description

The HC-110 series panel mount humidity controllers provide
humidity display, relay control, and feature programmable setpoints,
upper and lower setpoint limits, differentials and calibration.

Applications

Applications include computer rooms, HVAC,
food service, medical, agricultural and industrial equipment.

Features

• Membrane touch-pad programming
• 0.56" high red LED display
• Programmable setpoint(s) and differential(s)
• Panel mount enclosure

Specifications

Power requirements: Available in 12 or 24 volt models -
Specify AC (2VA) or DC (100 mA) voltage supply
Sensor: Not included (see HS 50 series or HS 800 series
specifications)
Accuracy: +3% (depends on accuracy of sensor)
Relay status indicator: Lighted while relay is activated
Dimensions & Wiring
relay status indicator
1.51"
ADJUST
(38mm)
3.22"
(82mm)
1724 Lake Drive West • Minneapolis, MN 55317 • 612-448-2217 FAX 612-448-1606 • Made in USA
Custom Design
Innovative Technologies in Custom Electronic Design & Manufacturing
0.125"
(3mm)
hidden
%RH
button
1.27"
(32mm)
SET
N0 C NC NO C NC G S +5 –3 – +
SP-2 SP-1
HUMIDITY CONTROLLERS
• Humidity setpoint display
• LED relay status indicator(s)
• Tamper resistant programmable setpoint limits
• Available with single or dual stages
Relay(s) contact rating: SPDT relay, 4 Amp
(24 VAC resistive)
Ambient temperature range: 20° to 158°F,
– 6° to 70°C
Humidity: 90% non-condensing
Agency approvals: U.L. and C.U.L. recognized
Weight: 3.6 oz. (0.1kg)
1.51"
(38mm)
2.533"
(64mm)
+ = volt (white)
Input
Power
– = ground (black)
–3 = factory
+5= VDC (red)
Sensor
G = ground (black)
S= signal (white)
HC–110
1.35"
Cutout Dimensions
(34mm)
3.1"
(79mm)