Menu Functions; Record Setup - Midland STREET GUARDIAN DUAL User Manual

Operating instructions – Video recording
Video mode and recording
• At start-up the unit automatically enters in video recording mode, there is a video recorder icon
shown on the top left corner of the LCD;
• Short press the OK button to stop recording;
• Short press the OK button again to start recording again; the blue led starts flashing, indicating
that the DVR is recording.
While recording:
• Press the button to lock the file and to shot a photo (the file will be neither deleted nor
overwritten)

Menu functions

• When the car DVR is turned on it automatically enters in video recording mode: on the top left
corner of the LCD, the video recorder icon will appear.
• Press the OK control to stop recording and then press MENU to enter the functions.
With the / buttons you can browse the menus.
• Select the desired one by pressing OK and then you will find the options: confirm your selection
with OK.

Record setup

The following video settings are available:
• Resolution
• Loop Recording
• G-Sensor
• Audio recording
• Parking mode
• Exposure
• Plate number
• Stamp
• Rotate display
• Time lapse
• Power OFF delay
• Resolution:
Dual 1080p 30 – Dual camera 1920 x 1080p 30 fps
Mono 1440p 30 - Single camera 2560 x 1440p 30 fps
Mono 1296p 30 - Single camera 2304 x 1296p 30 fps
Mono 1080p 60 - Single camera 1920 x 1080p 60 fps
Mono 1080p 30 - Single camera 1920 x 1080p 30 fps
20