JVC KD-X182BT Instruction Manual page 31

Digital media receiver
Hide thumbs Also See for KD-X182BT:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting
Symptom
Remedy
Phone sound quality
• Reduce the distance between the unit and the Bluetooth
is poor.
device.
• Move the car to a place where you can get a better signal
reception.
Phone call sound cannot
• Press
be heard from the car
and private talk mode. (Page 13)
speakers.
Voice calling method is
• Use voice calling method in a more quiet environment.
not successful.
• Reduce the distance from the microphone when you speak
the name.
• Make sure the same voice as the registered voice tag is
used.
Sound is being interrupted
• Reduce the distance between the unit and the Bluetooth
or skipped during playback
audio player.
of a Bluetooth audio
• Turn off, then turn on the unit and try to connect again.
player.
• Other Bluetooth devices might be trying to connect to the
unit.
The connected Bluetooth
• Check whether the connected Bluetooth audio player
audio player cannot be
supports Audio/Video Remote Control Profile (AVRCP).
controlled.
(Refer to the instructions of your audio player.)
• Disconnect and connect the Bluetooth player again.
"PLEASE WAIT"
The unit is preparing to use the Bluetooth function. If the
message does not disappear, turn off and turn on the unit,
then connect the device again.
"NOT SUPPORT"
The connected phone does not support Voice Recognition
feature or phonebook transfer.
during a call to switch between hands-free
Symptom
Remedy
"NO ENTRY"
There is no registered device connected/found via
Bluetooth.
"ERROR"
Try the operation again. If "ERROR" appears again, check if
the device supports the function you have tried.
"NO INFO"/"NO DATA"
Bluetooth device cannot get the contact information.
"H/W ERROR"
Reset the unit and try the operation again. If "H/W ERROR"
appears again, consult your nearest service center.
"SWITCHING NG"
The connected phones might not support phone switching
feature.
The Bluetooth connection
Delete the unused registered Bluetooth device from the
between the Bluetooth
unit. (Page 15)
device and the unit is
unstable.
If you still have troubles, reset the unit. (Page 4)
27
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents