Table of Contents
Advertisement
GENERAL
INFORMATION
To ensure you get the very best from your new Worcester oil
boiler, please read these notes and instructions carefully.
Discard the user instructions provided within the white boiler
casing of the boiler and only use the Outdoor Pack user
instructions and boiler customer care guide.
ELECTRICAL CONNECTION
The electrical supply to this appliance must satisfy the latest
edition IEE wiring regulations and any local regulations, which apply.
The mains supply to the boiler should be fed via a circuit
breaker including earth leakage protection.
The mains supply for your Worcester boiler is 230 volts
AC-50Hz.
Your boiler must be earthed and protected by a 5-amp fuse
to BS1362.
VENTILATION AND AIR SUPPLY
Air for the boiler is supplied via the flue terminal, and no
other air supply is required.
ROUTINE MAINTENANCE
It is essential that your boiler is installed and serviced by a
competent heating engineer, and Worcester Heat Systems will be
pleased to arrange regular servicing and a comprehensive
maintenance contract.
Servicing should be carried out at least once a year for boilers,
which burn 28-second kerosene.
The service engineer should have access to the property to
check for system faults and reset / replace electrical safety devices.
WARNING NOTE:
Your boiler is serviced and repaired externally. External
equipment operated at 230 volts should not be serviced or repaired
under adverse weather conditions.
WARNING NOTE:
The service socket has been designed for use by the service
engineer only and should not be used for connection to any other
electrical household products.
3
Advertisement
Table of Contents
