Related Manuals for Lancol MICRO-300
Summary of Contents for Lancol MICRO-300
- Page 1 MICRO-300 battery conductance tester User Manual MICRO-300 Battery Conductance Tester User Manual Thank you for purchasing our battery conductance tester, please read this manual carefully and save it for reference before using!
- Page 2 MICRO-300 battery conductance tester User Manual Battery Conductance Tester MICRO-300 adopts currently the world's most advanced conductance testing technology to easily, quickly and accurately measure the actual cold cranking amps capability of the vehicle starting battery, healthy state of the battery...
-
Page 3: Battery Test
MICRO-300 battery conductance tester User Manual How to use: 1. Connect the red test clamp with battery anode and the black one with cathode, the tester will power on automatically. Voltage battery below 7.0VDC can’t be tested properly, then press OK key to continue. -
Page 4: Cranking Test
MICRO-300 battery conductance tester User Manual （2）Cranking Test After entering the second start system test function ， the press OK key as following: Cranking Test START ENGINE Starting the engine as prompted, tester will automatically complete the cranking test and display the result. -
Page 5: Charging Test
MICRO-300 battery conductance tester User Manual This is for the convenience of the maintenance personnel to quickly know the whole state of the starting system according to the data. If the engine starting can`t be detected, there may be no output of charging voltage, you need to check the generator. - Page 6 MICRO-300 battery conductance tester User Manual After the test finished, tester displays the effective charging volts, ripple test result and charging test result. Charging Test Loaded 13.97V Unload 14.23V Ripple 15mV CHARGING NORMAL Check the connection between generator and battery, then retest.
-
Page 7: Print Data
MICRO-300 battery conductance tester User Manual （4）Review Data After entering the forth function, then press OK key you can view the final test result. （5）Print Data Print the last test result by the printer of this battery tester. （6）Export Data Connect this battery tester to computer with Data Line and export the data to computer.