Insignia NS-39DR510NA17 User Manual page 49

NS-39DR510NA17_16-0747_MAN_V2_EN.book Page 44 Monday, October 31, 2016 9:06 AM
Scanning for channels can take several minutes.
Now, you're ready to watch broadcast TV! While you're watching, try the following:
• Press the UP and DOWN arrows to change channels.
• Press the LEFT arrow to display the channel list and then use the UP and DOWN arrows to select a channel to watch.
Or press REWIND or FAST FORWARD to jump through the channel list a page at a time.
• Press OK to display information about the current program.
• Press to switch to the previously tuned channel.
• Press to see options for picture and sound settings.
44
Tip
Repeat the channel scan from time to time to make sure you are receiving all of the
latest channels. Broadcasters add and remove channels, move channels to different
parts of the spectrum, and change the power levels of their channels periodically.
Note
You'll have to repeat the channel scan if you remove the Antenna TV tile from the
Home screen or perform a factory reset. To repeat the channel scan at any time, go to
Settings >TV inputs >Antenna TV > Scan again for channels > Start finding
channels. Your antenna reception and picture quality depend on the position of
your antenna and on your location relative to the antennas of broadcasters in your
area.
Note
If is not available on your remote control, you can use
Jump Back button on a universal remote. For more information, see
page 68.
Remote control on page 12
buttons while watching TV.
has more information on using the remote control
www.insigniaproducts.com
on the Roku App or the
Other devices on
NS-39DR510NA17