Remote Controller; Remote Controller Display - Omega OTEC IEWH Series Technical Manual

〖Remote Controller〗

Display Screen
For setting display
Airflow sweep Button
horizontal
For changing
blades position and
swing or not. (optional)
HEALTH Button
To start or stop health
function.(optional)
On/Off Button
Press this button to start /
stop air conditioner.
Temp Adjustment
Buttons
Press " ▼" to decrease
temp. Press " ▲ " to
increase temp.
TURBO Button
To start or stop turbo function
When air condtioner is in
HEAT or COOLING mode.
DISPLAY Button
To start or stop dispaly
when air conditioner is in
running
Timer selection
Button
Press this button to
select timer.
Rem arks:
1. The function and display of Heat is not available for cooling-only air conditioner. .
2. When there is something wrong with the remote controller, please press 'RESET' button and then operate again.
3. HEAT、AUTO function and display are not available for cooling-only type air conditioner.
4. If user want tomake the room air cool or warm quickly ,user can press "turbo" button in cooling or heating mode,air
conditioner will run in power function.If press "turbo" button again, air conditioner will exit power function.
5. The above illustration of remote controller is only for reference, it may be slightly different from the actual product
you selected.
LOCK Button
CLEAN Button
Press this button to set
Press this button to
or cancel self-locking button
turn on self-cleaning
function of remote controller.
function
-11-
Airflow sweep Button
vertical
For changing
blades position and
swing or not.
Mode selection Button
For selecting
AUTO HEAT
COOL DRY
SWEEP
Fan speed button
For selecting indoor fan speed .
Auto Medium
High Low
Sleep Button
For setting sleep function.
Quiet Button
Set the air conditioner
operating in low noise.
Reset Button
Delete all settings, and
reset remote control.