Model Numbers: ALE-SB623034, ALE-SB624234, ALE-SB625234, ALE-SB627234, ALE-SB628434
Safety Instructions
CAUTION: Use caution when handling and assembling metal parts. Metal may have sharp edges or corners.
Manufacturer recommends the use of protective gloves when assembling product.
• This unit should be installed on a level surface.
• Do not use this unit as a step ladder. Do not climb on the unit.
• This unit is not intended to be used in any other manner than for storage.
• Do not exceed the manufacturer's recommended weight capacity of 150 lbs. / 68 kg. on each shelf. Always distribute weight evenly on shelves.
• The manufacturer recommends the storage of heavier items on bottom shelves.
All assembly instructions must be followed exactly or the unit may not be assembled correctly and may not be stable. Assemble the unit on level surface.
Parts List
Top
Bottom
A
- Left Side Panel
Please refer to the chart below to confirm that you have the correct number of parts for your Alera product. Products are listed by their model number.
Page 1
- Kick Plate - Left Side Panel - Left Back Panel Please refer to the chart below to confirm that you have the correct number of parts for your Alera product. Products are listed by their model number. ALE-SB623034 ALE-SB624234...
Page 2
Quick Assembly Bookcase Page 2 Assembly Instructions TIPS FOR EASIER ASSEMBLY: • 2-person assembly is recommended. • Assemble the unit on a flat surface. • Some locking tabs may flatten out or bend open during transport. Locking Tab Adjustments can easily be made using a small blade screwdriver with light pressure. Can be adjusted open or closed to ease assembly Step 1 Back Assembly...
Page 3
Quick Assembly Bookcase Page 3 Step 3 Bottom Assembly The Kick Plate slides into the Position the Kick Plate (I) as illustrated and Channel channel on the Side Panels and begin installation by lifting its right end locks into place. upwards inside the channel on the Right Side Panel B).
Page 4
Quick Assembly Bookcase Page 4 Step 4 Top Assembly Begin inserting the posts on the Top (E) into the channels on the Right and Left Side Panels. Starting with the Top on a slight angle may help. Posts Top - E Once both posts are started.