JVC RX-D205SJ Instructions Manual page 10

Do not connect the AC power plug to the wall outlet until all connections are completed.
7 Connecting a VCR
COMPONENT VIDEO
P
P
VCR(DBS) DVR/DVD MONITOR
IN IN OUT
VCR
OUT(REC) IN(PLAY)
NOTES
• When connecting a VCR to the component video input jacks,
select the component video input mode (VCR VIDEO IN)
correctly. If you do not, you cannot view the playback picture on
the TV or the AV COMPU LINK remote control system cannot
operate properly. See page 20 for details.
• When using a stereo audio cable as the illustration above, set the
audio input mode to "ANALOG." For details, see "Selecting the
analog or digital input mode" on page 12.
• You can enjoy digital sound if using a digital coaxial or optical
cable. When shipped from the factory, the digital input terminal
setting for a VCR is set to use the digital optical terminal
(DIGITAL IN 3 (VCR)). For details of digital connection, see
page 10.
8
Green
Component video cable (not supplied)
Blue
Y
Red
B
R
AUDIO
VCR
OUT(REC) IN(PLAY)
S-video cable (not supplied)
Composite video cable (not supplied)
Turn off all components before making connections.
• When you connect other components, refer also to their
manuals.
White
Red
Stereo audio cable
Red
(not supplied)
White
Composite video cable
(not supplied)
Å To component video output
• Connect Y, P , and P
B
ı To left/right audio channel output
Ç To left/right audio channel input
Î To composite video output
‰ To S-video output
Ï To S-video input
Ì To composite video input
Å
VCR
ı Ç Î ‰ Ï Ì
correctly.
R