Kucht KR Series Installation Manual page 9

Confiden�al
ATTENTION:
There is a stainless steel door and stainless kick plate op�on. Please consult the authorized service.
Ven�la�on:
Vent holes where the air enters and exits the unit must not be blocked or obstructed. In addi�on, you must
periodically clean the dust and dirt that accumulate on these holes in �me.
Electrical Connec�on:
Never use an extension cable.
The power socket must be grounded and checked by an authorizedperson.
Loca�on of the electrical wiring must comply with the dimensions specified in the manual.
ATTENTION:
RISK OF ELECTRIC SHOCK
Electrical grounding is necessary. This appliance is equipped with a three pin plug
to protect you against possible electric shocks.
• Do not remove the round grounding terminal from theplug.
• Do not use two pin grounding adapters.
• Do not use extension cables to energize theproduct.
ATTENTION:
Do not connect the grounding cable to the gas pipe. Please have the grounding checked by a qualified electrician if
you are not sure about the grounding of the product. Do not install a fuse on the neutral line or grounding circuit.
WARNING:
Please wait for 3 6 hour before energizing the product to protect it against possible damages. This way, the
refrigerant and the lubricants in the system get balanced.
Water Connec�on
Pressure of the mains water must be in compliance with the values specified in the manual.
Loca�on of the water system must comply with the dimensions specified in the manual.
IMPORTANT INFORMATION:
Bypass is recommended for the water filtering system if a reverse osmosis system is used.
9
WWW.KUCHT.COM