Advertisement
Quick Links
Advertisement
Related Manuals for Antelope Pico 2.0
Summary of Contents for Antelope Pico 2.0
- Page 1 ANTELOPE PICO 2.0 OPERATING QUICK GUIDE V1.0...
-
Page 2: Remote Control Panel (Rcp)
Remote Control Panel (RCP):... - Page 3 The Display: – Bank State: The Antelope Pico has a user configurable number of memory partitions, or as we call them, “banks”, from 1 up to 4. The banks are representend by 4 squares of different color depending on the state in which they are.
- Page 4 – Yellow means clip stored (or triggered) and currently displayed on video out. Yellow banks are also called “browsing” banks. here bank 3 is triggered and displayed on video out. – Red means recording, until triggered or until the current recording bank has changed.
- Page 5 – Bank Definition: To define the number of active bank, the user must press shift + the number of desired active banks. For example: Will activate only one bank with the maximum recording capacity. Bank 2,3,4 invalid. Will activate 2 banks with half the maximum recording capacity for each.
- Page 6 – Bank Selection: To select a bank, simply press the button with the corresponding number (1,2,3 or 4). If a triggered (green) bank is selected, it will become “browsing” (yellow) If a recording (red) bank is selected, it will reset the recording in this bank and display the live output to the replay channel.
- Page 7 The user can also delete all banks at once and start recording in the first bank. Simply press the “clear bank /all” button plus the “all” button: – Display the live output also on the replay channel: To display the live output on the replay channel, the user needs at least one recording (red) bank.
- Page 8 Simply press the “trigger” button to trigger: Test scenario in a 3 active bank setup (“shift”+3): Bank 1 is recording (red) Bank 2 is empty (blue) Bank 3 is empty (blue) Bank 4 is invalid (gray) => meaning the user set 3 active banks When the user triggers, the recording will stop in Bank 1, starts over in Bank 2, and the user will be able to browse the content of Bank 1.
- Page 9 If the user triggers again, the recording will stop in Bank 3, check for an empty (blue) bank, founds none and stop recording. The user will browse Bank 3, bank setup as following: Bank 1 is stored (green) Bank 2 is stored (green) Bank 3 is browsing (yellow) Bank 4 is invalid (gray) Of course triggering when there is no recording (red) bank has...
- Page 10 – Trigger live The trigger live function is almost similar to the trigger function except that it doesn't change the triggered bank into browsing state. Which means the user can trigger live while doing a playback, it will have no interference unlike the classic trigger where, even if the user is doing a replay, it will change the video out to the newly triggered bank.
- Page 11 Trigger live happens: Bank 1 is stored (green) Bank 1 is stored (green) Bank 3 is recording (red) Bank 4 is invalid (gray) There is no browsing (yellow) bank, so the live output is still displayed on the replay channel. Trigger live happens: Bank 1 is stored (green) Bank 2 is stored (green)
- Page 12 Trigger live happens: Bank 1 is browsing (yellow) Bank 2 is stored (green) Bank 3 is stored (green) Bank 4 is invalid (gray) There is no more recording (red) bank, record will restart when banks are cleared. – Browsing state When a bank is in browsing (yellow) state, the low part of the screen has the information needed by the user.
- Page 13 The user can do the following actions in browsing mode: The jog changes the current frame displayed on the replay channel backward or forward by a frame offset of 1 by default The play button initiate a playback from the current frame until the mark out point (by default the end of the bank) Pressing play while already playing has no effect The pause button initiate a pause of the playback.
- Page 14 Sets the current frame to the first frame of the Bank Sets the current frame to the last frame of the Bank...
Need help?
Do you have a question about the Pico 2.0 and is the answer not in the manual?
Questions and answers