Advertisement
Quick Links
Advertisement
Related Manuals for Elmuz M-1002
Summary of Contents for Elmuz M-1002
- Page 1 Pr ofessional mixer console M-1002 M-1602 M-2202...
- Page 2 Professional mixer 1 XLR Mic. Inuput Balanced XLR Mic. Connector, power supplied by +48V phantom power, can accept all kinds of balanced or unbalanced Mic. Signal. 2 LINE INPUT balanced connector can accept balanced or LINE unbalanced sound signal, such as keyboard or other musical instrucpments.
- Page 3 Professional mixer 11 PAN Signals can be distributed to right and left generatrix unequally by adjusting this control. When the knob is in the middle, the signals are distributed equally to both right and left lines. When the knob is on the left, the signals to the right channel will increase, while to the left, decrease.
-
Page 4: Line Input
Professional mixer 1 STEREO/MONO Lotus connector and 1/4 connector are right and left stereo line input STEREO that are used for balanced high level input signals. If the signals are input to input connector of left channel, output level of signal output will be transited to the left or right signal;... - Page 5 Professional mixer 11 CHANNEL ADJUSTMENT FADER STEREO For performance harmony, adjust this fader to control total channel signals from MAIN and SUB. 12 PFL You can monitor the output condition from this channel by headphone when pressing this control. MONO INPUT HIGH AUX1...
-
Page 6: Main Control Section
Professional mixer MAIN CONTROL SECTION 1 Total output balanced connector of right/left channel (BALANCE) Pin 1= Ground Pin 2= Signal+ Pin 3= Signal- 2 Total output of main right/ left channel unbalanced connector (MAIN) Top= Signal Ring= Ground Hole=Sleeve AUX2 3 SUB1/SUB2 SUB1 SUB2... - Page 7 Professional mixer 11 POWER INDICATOR The machine is under working condition while the indicator is on. 12 +48V PHANTOM POWER SUPPLY INDICATOR (1-3) No. 1-3 channel and No. 7-9 channel have AUX2 been connected to +48V phantom power supply when the indicator is on. SUB1 SUB2 AUX1...
- Page 8 Professional mixer 1 CTRL SMALL-SIZED Connector for monitor speaker and amplifier GROUP MIXERS connected from outside. CTRL 2 AUX IN Stereo input connector. It can also be connected with other audio signal input. SEND 3 PHONES AUXIN RETURN Connected with stereo headphone, to monitor the condition of total output and input from each channel.
- Page 9 Professional mixer 11 REPEAT Return level can be controlled by adjusting TAPE this knob. 12 DELAY PHONE Delayed time can be changed by adjusting this LEVEL knob. 13 PAN SEND Adjust this knob to control the level of right and left channels that is distributed from effect signals.
- Page 10 Professional mixer T e c h n i c a l S p e c i f i c a t i o n s MODEL M-1002 M-1602 M- 2202 CONDITON Mic-60dBm Aux in-20dB Aux Send-20dB line-20dBm Input Sensitivity Tape in-10dB...
Need help?
Do you have a question about the M-1002 and is the answer not in the manual?
Questions and answers