Related Manuals for Worx Nitro LEAFJET WG543E
Summary of Contents for Worx Nitro LEAFJET WG543E
- Page 1 SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 20V Cordless Blower WG543E WG543E.X...
-
Page 2: General Power Tool Safety Warnings
ORIGINAL INSTRUCTION c)Keep children and PRODUCT SAFETY bystanders away while operating a power tool. WARNING: Read all Distractions can cause you to safety warnings and all lose control. instructions. Failure to follow the warnings and instructions 2)Electrical safety may result in electric shock, fire a)Power tool plugs must and/or serious injury. - Page 3 entangled cords increase the appropriate conditions will risk of electric shock. reduce personal injuries. e)When operating a power c)Prevent unintentional tool outdoors, use an starting. Ensure extension cord suitable the switch is in the for outdoor use. Use of a off-position before connecting to power cord suitable for outdoor use...
- Page 4 for the connection of dust tool or these instructions extraction and collection to operate the power tool. facilities, ensure these are Power tools are dangerous in connected and properly the hands of untrained users. used. Use of these devices e)Maintain power tools. Check for misalignment can reduce dust-related or binding of moving...
- Page 5 charger specified by the repair person using only manufacturer. A charger identical replacement parts. This will ensure that that is suitable for one type of battery pack may create the safety of the power tool is a risk of fire when used with maintained.
- Page 6 supervision only. 2) Preparation -The use of the device in the a) While operating the rain or in a humid environment appliance, always wear is forbidden. substantial footwear and -The manufacturer is not liable long trousers. Do not for damage which is caused operate the equipment when through inappropriate use or barefoot or wearing open...
- Page 7 d) Always be sure of your persons with reduced footing on slopes. physical, sensory or mental e) Walk, never run; capabilities or lack of f) Keep all cooling air inlets experience and knowledge clear of debris. or people unfamiliar with g) Never blow debris in the these instructions to use the direction of bystanders.
- Page 8 d) Operate the machine in a f) If the machine should start recommended position and making any unusual noise or only on a firm, level surface. vibration, immediately shut e) Do not operate the machine off the power source and on a paved or gravel surface allow the machine to stop.
-
Page 9: Safety Warnings For Battery Pack
or possible fire. to change an accessory, k) Do not transport this shut off the power source, machine while the power disconnect the machine source is running. from the supply and make l) Always disconnect the sure that all moving parts machine from the power are come to a complete supply (e.g. - Page 10 pack on charge when not other metal objects, like in use. paper clips, coins, keys, j) After extended periods nails, screws or other small of storage, it may be metal objects, that can necessary to charge and make a connection from one discharge the battery terminal to another.
- Page 11 SYMBOLS Li-Ion battery. This product has been marked with a symbol relating to ‘separate collection’ for all Read the operator’s manual battery packs and battery pack. It will then be recycled or dismantled in order to reduce the impact on the environment.
- Page 13 100%...
-
Page 16: Component List
COMPONENT LIST SUGGESTED BATTERIES AND CHARGERS AIRSPEED SELECTOR NOZZLE Category Model Capacity BLOWER TUBE WA3553 4.0 Ah ON/OFF SWITCH 20 V Battery WA3551 2.0 Ah HANDLE WA3551.1 2.0 Ah BATTERY PACK RELEASE BUTTON * 20 V Charger WA3880 2.0 A BATTERY PACK * We recommend that you purchase your accessories MOTOR HOUSING... -
Page 17: Assembly And Operation
This tool may cause hand-arm vibration Air speed mode syndrome if its use is not adequately managed. NOTE: The blower is in the air speed mode WARNING: To be accurate, an estimation of for default assembly. exposure level in the actual conditions of use NOTE: The blower has two working modes: should also take account of all parts of the operating air speed mode and air volume mode. -
Page 18: Environmental Protection
DECLARATION OF could seriously damage the plastic. Self lubricating bearings are used in CONFORMITY your product, therefore lubrication is not required. Positec Germany GmbH Postfach 32 02 16, 50796 Cologne, Germany ENVIRONMENTAL On behalf of Positec declare that the product PROTECTION Description Battery-operated Blower Type WG543E WG543E.X (520-559 - designation... - Page 19 DECLARATION OF CONFORMITY Positec (UK & Ireland) Ltd. PO Box 6242, Newbury, RG14 9LT, UK On behalf of Positec declare that the product, Description Battery-operated Blower Type WG543E WG543E.X (520-559 - designation of machinery, representative of battery-operated Blower Vacuum) Function Blowing Complies with the following regulations: Supply of Machinery (Safety) Regulations 2008 Electromagnetic Compatibility Regulations 2016...
- Page 20 www.worx.com Copyright © 2022, Positec. All Rights Reserved. AR01531803...