Product Specifications - URCERI SND133 User Manual

▪ When the icon
of the torque adjustment collar, the torque is the largest.
Note:
1. Before actual driving, you could make a pilot hole. Test to find
out the required torque by driving into the targeted material.
2. The the arrow/white spot of the adjustment collar cannot be
locked in a middle position.
Step 4: Power on the product
Point the screwdriver to the target object. Press and hold the power button to start
drilling. Release the power button to turn off. The LED flashlight would turn on
automatically when the product is operating.
How to adjust the angle of the handle?
1. Hold the front of the screwdriver in one hand.
2. Press in the angle adjustment button and twist the handle clockwise to change to
in-line grip or anticlockwise to change to pistol grip.
3. Release the angle adjustment button.

PRODUCT SPECIFICATIONS

Screwdriver: No-load speed: 200 rpm
Chuck size: 1 / 4"=6.35mm (male)
Torque Range: 3.5 ~ 6 N.m
7-stage torque settings
Acoustic pressure level: Lpa < 70dB(A)
Emitted vibration: Acceleration < 2.5 m/s2
USB Cable (Output): DC 5V 1A
is aligned with the arrow/white spot on top
EN-5