Vaporesso GEN AIR 40 User Manual page 4

Figure 1
Figure 2
USE INSTRUCATIONS
1. Coil Installation (Refer to FIGURE 1)
Make sure the cartridge is empty before installing
the coil. Insert the coil firmly into the cartridge.
2. Coil Replacement (Refer to FIGURE 1)
Make sure the cartridge is empty before replacing
the coil. Pull out the used coil and install a new
one firmly.
3. Fill the E-liquid (Refer to FIGURE 2)
Pull out the red silicone plug of the pod.
Fill the e-liquid through the filling slot.
Put the silicone plug back.
*If it's the first time filling the e-liquid, please
wait 5 minutes for the coil to prime.
2 ENGLISH