Table of Contents
Advertisement
4.0 Stable Listening Room Environment
A Wilson Benesch loudspeaker is constructed from high quality materials and surface finishes that are durable. However these products are electronic devices, constructed
from precision components. Your Wilson Benesch loudspeaker should be protected at all times from high humidity, water and direct sunlight. It is highly recommended
that in parts of the world where humidity is a problem, that the environment is air conditioned and maintained at a steady state to ensure the loudspeakers are not
subject to water vapour damage.
During periods when the loudspeakers will not be used, it is recommended that they are covered using the covers provided. The surface finishes applied to all Wilson
Benesch loudspeakers require no further attention other than the occasional dusting with a microfibre cloth. Direct sunlight is very damaging to material finishes and
must be avoided.
No cleaning products or chemicals should be used on the surface finishes and in particular the drive units must not under any circumstances be cleaned with any
chemicals.
4.1 Running-in (168-hours)
The quality of the sound that you hear when you first use your Precision Series loudspeakers will improve significantly over time. However, the biggest changes to the
performance of your Precision Series loudspeaker will take place during what is commonly known as the running-in or burn-in period. Wilson Benesch recommends at
least one hundred and six-eight hours of running in before making any subjective judgements of the speaker's performance, but the loudspeaker will continue to improve
well beyond this.
4.2 Partnering Products
There are a huge number of products available throughout the world that can be partnered with Wilson Benesch loudspeakers and it would not be helpful to the end
user to make any specific recommendations for any particular cabling or electronics products that are "guaranteed" to meet or exceed all of the expectations for the
end user. System matching and synergy is a balancing act. Every listener is unique and what works well in one situation will not necessarily be the best way forward in
another. Auditioning is critical to getting the best from any investment and specifications alone will only give an indication of performance. While the power specifications
of any potential partnering amplifiers should be considered, there are of course many other factors that will influence how well a particular amplifier is able to drive a
loudspeaker.
PRECISION SERIES MANUAL
REV 1.3
11
Advertisement
Table of Contents
