Subscribe to Our Youtube Channel
Related Manuals for DS18 BC60LP
Summary of Contents for DS18 BC60LP
-
Page 2: Operating Modes
BATTERY CHARGING STATION The BC60LP is a high power 12V power supply and battery charger intended for home use, enabling its use in a variety of situations, as described below: • Departure by car; • Charging and recovery of worn batteries;... - Page 3 STEP BY STEP CHARGING STAGE MODE Step 1: Press MODE selector until LED CHARGING STAGE lights up Step 2: Press VOL TAGE / BATTERY selector and select the capacity of the batter y to be charged or the nearest value Note: If you have more than one batter y, add the capacity of all and then select the nearest value.
- Page 4 STEP BY STEP AUTO ICS MODE Step 1: Press MODE selector until AUTO SCI led turns on; Step 2: Connect the Red (+) and Black ( )clamps on the battery poles Step 3: The battery will be fully charged when the full charge led lights up. Note: The Source can be constantly connected to the battery without any damage to it.
- Page 5 DESCRIPTIONS Air inlet / outlet, intelligent ventilation, do not obstruct Red (+) and Black ( ) clamps for connecting to battery poles 12V / 10 Amp outlet On-off switch Mains power cable, automatic bi-volt (110/220) Read Selector Switch: - Source output voltage - Source output current - Batter y check up, (2 LEDs on) Operation mode selector switch:...
-
Page 6: Important Tips
IMPORTANT TIPS 1. P rioritize charging the batteries at a slow charge, thus accumulating more charge and extending the life of the battery 2. If the batteries are discharged, charge only in slow charge mode to avoid overheating and overcharging. 3.
Need help?
Do you have a question about the BC60LP and is the answer not in the manual?
Questions and answers