Advertisement
How to receive ATSC
To receive ATSC, you need an antenna. An indoor antenna is able to receive a signal, but use of
outdoor antenna is recommended. You can also receive a signal by Cable, but certain Cable
companies may not provide this service. Ask your cable company for more information. Please
consult your local dealer which type of antenna is suitable for you. In order to receive an ATSC signal,
you must first run the AUTO TUNER SETUP available in the "Interactive Plug In Menu" or regular
"Menu" on your TV.
Adjusting Your Antenna
If you do not get good reception for certain channels, please adjust the antenna so that the signal level
reaches the maximum.
Notes:
Be aware of the following:
ü
The best direction of the antenna varies according to the broadcasting stations. You can retrieve
some important information such as your regional broadcasting stations, broadcasting channels,
and the best direction of the antenna by inputting your address or Zip code at the following
address:
http://www.antennaweb.org/aw/Address.aspx
notice)
ü
Depending on the antenna location sometimes you might not be able to receive a channel clearly
(ghosting or other adjoin channel may be visible). This may be caused by tall buildings, trees or
mountains in your geographic location
ü
Sometimes, a major channel number is changed by some broadcasting stations. In this case,
you need to execute the AUTO TUNER SETUP again. At this time, you need to execute the
AUTO TUNER SETUP only on Digital channels by setting the ANALOG TUNER to SKIP.
Channel Selection
You should use the "SUB CHANNEL" key when you want to select a digital channel directly. For
example, to select channel "15-2", please push the following buttons:
"1"
"5"
"SUB CHANNEL"
"2"
If you do not select "SUB CHANNEL", the TV will select the lowest number channel (for example, 15-1
(This address may be changed without
3
Advertisement
