Connecting To Jvc Av Compu Link - JVC AV-27260 User Manual

Connections

Connecting to JVC AV Compu Link

AUDIO VIDEO S VIDEO
R L MONO
OVER INPUT
1
INPUT
4
COMPONENT
VIDEO IN
75
(VHF / UHF)
R L
AUDIO OUT
AV COMPULINK EX
To Connect:
NOTES:
* In order for the VCR playback to begin automatically, the recording tab must be removed from the
VHS tape. If the tab is in place, automatic switching will occur when you push the VCR's P
• The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.
• If your JVC-brand VCR has "A Code/B Code Remote Control Switching" (see your VCR's user's guide),
using VCR A Code will switch the TV to input 1.
• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi's
connection instructions in its user's guide for detailed connection information.
• AV COMPU LINK EX is compatible with the following receivers: RX-664V, RX-665V, RX-668VBK,
RX-774V, RX-778VBK, RX-884V, RX-888VBK, RX-1024V, RX-1028VBK, and later receiver models.
16
VCR or DVD player
AV
Compu
Link EX
Swap
button.
LAY