Atec KODIAK Instructions For Use Manual

Spinal fixation system

Advertisement

Quick Links

TM
KODIAK
SPINAL FIXATION SYSTEM
INSTRUCTIONS FOR USE

GENERAL INFORMATION:

The Kodiak Spinal Fixation System is intended for posterior, non-cervical, spinal fixation as an adjunct to fusion
for the treatment of degenerative disease, deformity, and trauma indications.
The Kodiak Spinal Fixation System consists of a variety of shapes and sizes of rods, screws, hooks, connectors,
and cross connectors that provide temporary internal fixation and stabilization during bone graft healing and/or
fusion mass development. The screws, hooks, connectors, and cross connectors are manufactured from surgical
grade titanium alloy (Ti-6Al-4V ELI). The rods are available in commercially pure titanium, titanium alloy, and
cobalt chrome (CP Ti Grade 4, Ti-6Al-4V ELI, and Co-28Cr-6Mo).
If additional levels of fixation are required, the Kodiak Spinal Fixation System rods may be used in conjunction
with Alphatec Spine's Solanas
Kodiak Cross Connectors accept various rod diameters, and are appropriate for use with Alphatec Spine's 5.5
mm diameter rod-based systems, including the Arsenal Spinal Fixation System and the Zodiac
System.

INDICATIONS FOR USE:

The Kodiak Spinal Fixation System is intended for posterior, non-cervical fixation in skeletally mature patients as
an adjunct to fusion for the following indications: degenerative disc disease (defined as back pain of discogenic
origin with degeneration of the disc confirmed by history and radiographic studies); spondylolisthesis; trauma (i.e.,
fracture or dislocation); spinal stenosis; curvatures (i.e., scoliosis, kyphosis and/or lordosis); tumor;
pseudarthrosis; and/or failed previous fusion.
When used for posterior non-cervical pedicle screw fixation in pediatric patients, the Kodiak Spinal Fixation
System implants are indicated as an adjunct to fusion to treat progressive spinal deformities (i.e., scoliosis,
kyphosis, or lordosis) including idiopathic scoliosis, neuromuscular scoliosis, and congenital scoliosis.
Additionally, the Kodiak Spinal Fixation System is intended to treat pediatric patients diagnosed with the following
conditions: spondylolisthesis / spondylolysis, fracture caused by tumor and/or trauma, pseudarthrosis, and/or
failed previous fusion. Pediatric pedicle screw fixation is limited to a posterior approach.
The Kodiak Spinal Fixation System is intended to be used with autograft and/or allograft.

CONTRAINDICATIONS:

The system is contraindicated for:
1. Use in the cervical spine
2. Use with bone cement
3. Patients with allergy to titanium or cobalt chrome
4. Patients with osteopenia, bone absorption, bone and/or joint disease, deficient soft tissue at the wound site
or probable metal and/or coating intolerance
5. Patients with infection, inflammation, fever, tumors, elevated white blood count, obesity, pregnancy, mental
illness, and/or other medical conditions, which would prohibit beneficial surgical outcome
6. Patients resistant to following postoperative restrictions on movement especially in athletic and occupational
activities
7. Spinal surgery cases that do not require bone grafting and/or spinal fusion
8. Reuse or multiple uses
INS-108 Rev C
®
Posterior System, which may connect to the Avalon
03/2021
®
Occipital Plate System. The
®
Spinal Fixation
Page 1 of 8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KODIAK and is the answer not in the manual?

Questions and answers

Summary of Contents for Atec KODIAK

  • Page 1 The Kodiak Spinal Fixation System consists of a variety of shapes and sizes of rods, screws, hooks, connectors, and cross connectors that provide temporary internal fixation and stabilization during bone graft healing and/or fusion mass development.
  • Page 2 6. The instruments in the Kodiak Spinal Fixation System are reusable surgical devices except for the Fascial Blades, Single Step Stylets, and Guidewires used with the Kodiak Spinal Fixation System, which are single use only.
  • Page 3 (MR) environment. It has not been tested for heating, migration, or image artifact in the MR environment. The safety of the Kodiak Spinal Fixation System in the MR environment is unknown. Scanning a patient who has this device may result in patient injury.
  • Page 4 PREOPERATIVE MANAGEMENT: 1. Only patients meeting the criteria listed in the indications for use section should be selected. 2. Surgeons should have a complete understanding of the surgical technique, system indications, contraindications, warnings and precautions, safety information, as well as functions and limitations of the implants and instruments.
  • Page 5 order to facilitate more effective subsequent cleaning steps. Place instruments in a tray and cover with a wet towel to prevent drying. • The cleaning process is the first step in effectively reprocessing reusable instruments. Adequate sterilization depends on thoroughness of cleaning. •...
  • Page 6 Manual Cleaning Steps for Instruments Step 1 Rinse devices in ambient temperature tap water to remove visible soil. ® Prepare enzymatic solution, such as Prolystica 2X Concentrate Enzymatic Presoak & Cleaner or equivalent, per manufacturer’s recommendations and submerge device in enzyme solution. Actuate Step 2 the device while it is submerged and soak for a minimum of 10 minutes.
  • Page 7 • Instrument sets have been validated in standard configurations. No additional items should be added to the set for sterilization. Sterilization Parameters Minimum Exposure System Cycle Type Temperature Minimum Drying Time Cool Down Time Time Kodiak Spinal 270°F Fixation System Pre-vacuum 4 minutes 45 minutes 15 minutes (132°C) Sets Sterilization Notes: •...
  • Page 8 ALPHATEC SPINE, INC 1950 Camino Vida Roble Carlsbad, CA 92008 USA (760) 431-9286 (800) 922-1356 www.atecspine.com INS-108 Rev C 03/2021 Page 8 of 8...

Table of Contents