Subaru S209 2019 Service Manual page 103

2) Set the adapter into the center of wheel, and then set the wheel alignment gauge.
(1)
(2)
(1) Alignment gauge
(2) Turning radius gauge
(3) Adapter
3) Measure the camber angle in accordance with the operation manual for wheel alignment gauge.
Tire size
265/35R19
3. CASTER
1) Place the front wheel on the turning radius gauge. Make sure the ground contact surfaces of the front and
rear wheels are at the same height.
2) Set the adapter into the center of wheel, and then set the wheel alignment gauge.
(1)
(2)
(1) Alignment gauge
(2) Turning radius gauge
(3) Adapter
3) Measure the caster angle in accordance with the operation manual for wheel alignment gauge.
Tire size
265/35R19
4. STEERING ANGLE
1) Place the vehicle on turning radius gauge.
2) While depressing the brake pedal, turn the steering wheel fully to the left and right.
3) With the steering wheel held at each fully turned position, measure both the inner and outer wheel steering
angles.
Tire size
265/35R19
Wheel Alignment
(3)
FS-00213
Front camber (difference between RH
and LH 45 or less)
–1°050°30
(3)
FS-00213
Inner wheel
32.0°1.5°
FS-9
FRONT SUSPENSION
Rear camber (difference between RH and
LH 45 or less)
–1°500°45
Caster
6°38
Outer wheel
28.6°1.5°