Viewing A Jpeg File; Slide Show; Still Picture; Moving To Another File - JVC TH-G40 Instructions Manual

Viewing a JPEG file

This unit can play discs with JPEG files.
Before playing JPEG recordings, read the notes on
JPEG Recordings on the right.
1. Insert a disc and close the tray.
The PHOTO menu appears on the TV screen.
2. Press v / V to select a folder, and then press
ENTER. A list of files in the folder appears.
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on the
remote to highlight
3. If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY. While
viewing a file, you can press STOP to move to the
previous menu (JPEG menu).
Tips:
There are four Slide Speed options
> (Slow), >> (Normal), >>> (Fast) and II (off).
Use v /V /b /B to highlight the Speed. Then, use b / B
to select the option you want to use and then press
ENTER.
If you set Speed option to Off, the slide is not active.
and press ENTER.
:

Slide Show

1. Highlight the file (not folder) which you like
beginning to slide show.
2. Select the slide speed. (Refer to the tips this page)
3. Use v V b B to highlight the
then press ENTER.
Note:
•
The sequence of slide show is from top to down, cannot
be reverse.
•
Slide show cannot repeat automatically, you could start the
slide show again manually.

Still Picture

1. Press PAUSE/STEP during the slide show.
The DVD/CD Receiver will now go into the PAUSE
mode.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.

Moving to another File

Press SKIP (. or >) once during viewing a
picture to advance to the next or previous file.

Rotating the picture

Press v V b B during showing a picture to rotate the
picture clockwise or counter-clockwise.
JPEG disc compatibility with this player is
limited as follows:
• Depending upon the size and the number of
JPEG files, it could take a long time for the
DVD/CD Receiver to read the disc's contents. If
you don't see an on-screen display after several
minutes, some of the files may be too large —
reduce the resolution of the JPEG files to less
than 2M pixels as 2760 x 2048 pixels and burn
another disc.
• The total number of files and folders on the disc
should be less than 999.
• Some discs may not operate due to a different
recording format or the condition of disc.
• Ensure that all the selected files have the ".jpg"
extensions when copying into the CD layout.
• If the files have ".jpe" or ".jpeg" extensions, please
rename them as ".jpg" file.
• File names without ".jpg" extension will not be
able to be read by this DVD/CD Receiver. Even
though the files are shown as JPEG image files in
Windows Explorer.
(Slide Show)
18