Programmed Playback; Repeat Programmed Tracks; Erasing A Track From Program List; Erasing The Complete Program List - JVC TH-G40 Instructions Manual

Programmed Playback

The program function enables you to store your
Favourite tracks from any disc in the receiver memory.
A program can contain 300 tracks.
1. Insert a disc.
Audio CD and MP3/WMA Discs:
2. Select a track on the "List" and then press PROG.
or select " (Add)" icon and then press ENTER
to place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
Note:
You can add all tracks in the disc. Select "
then press ENTER.
3. Select the track you want to start playing on the
"Program" list. Press MENU to move to the next
page.
4. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
"Program" list have played once.
5. To resume normal playback from programmed
playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.
17

Repeat Programmed Tracks

1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
Erasing a Track from "Program" List
1. Use v V to select the track that you wish to erase
from the Program list.
2. Press CLEAR. Alternatively, select "
icon then press ENTER to place the selected track
( Add All)" icon
on the Program list. Repeat to erase additional
tracks on the list.

Erasing the Complete Program List

Use v / V to select "
ENTER.
Note:
The programs are also cleared when the disc is removed,
the unit is switched to power off or the function is switched to
others.
(Delete)"
(Del all)" and then press