Basic Tuner Operations; Turn On The Power; Select The Band; Adjust The Volume - JVC TH-A25 Instructions Manual

Basic Tuner Operations

TV
DIMMER
1
5
9
2
FM/AM
DVD FM/AM
TV CH
TV VOL
3
AUDIO VOL
+/–
TOP
MENU
CHOICE/TIME
AUDIO SUBTITLE ANGLE ZOOM
SLOW RETURN
PROGRESSIVE NTSC/PAL
RM-STHA25U
DVD CINEMA SYSTEM
• For in-depth information about tuner operations, see
"Tuner Operations" on pages 34 and 35.
• 9 kHz interval spacing is the initial setting for AM
tuner. You can change the interval spacing. See
"Setting the AM Tuner Interval Spacing " on page 34.
1

Turn On the Power

Press AUDIO (or STANDBY/ON
panel).
The STANDBY lamp goes off.
The source indication selected previously appears on the
display.
2

Select the Band

From the remote control:
Press FM/AM.
The last received station of the selected band is tuned in.
• Each time you press the button, the band alternates
between FM and AM.
AUDIO
1
AUDIO
SLEEP
2 3 4
6 7 8
0
MEMORY CANCEL
AUX SOUND
CONTROL TEST TONE
TV
TV/VIDEO MUTING
AUDIO VOL
MENU
ENTER
ON SCREEN
4
/
STEP TUNING
DOWN - TUNING - UP
UP/DOWN
PL REPEAT
FM MODE
on the front
AUDIO
FM/AM
On the front panel:
Press SOURCE repeatedly until the desired band (FM
or AM) appears on the display.
The last received station of the selected band is tuned into.
• Each time you press the button, the source changes as follows:
DVD/CD
AM
3
A
djust the Volume
From the remote control:
To increase the volume,
press and hold AUDIO VOL +.
To decrease the volume,
press and hold AUDIO VOL –.
On the front panel:
To increase the volume,
turn VOLUME control clockwise.
To decrease the volume,
turn VOLUME control counterclockwise.
4

Tune into a Station

From the remote control:
Press and hold TUNING UP or DOWN until the
station frequency starts changing continuously
on the display.
The system starts searching for a station.
• When a station of sufficient signal strength is tuned in, the system
stops searching, and the
On the front panel:
1 Press 7 so that "MANUAL" appears on the display.
2 Press and hold ¢ or 4 until the station frequency starts
changing continuously on the display.
The system starts searching for a station.
Notes:
• When an FM stereo program is received, the
lights up.
• When you press the button repeatedly, the frequency changes step
by step.
To turn off the power (into standby)
Press AUDIO (or STANDBY/ON
panel).
The STANDBY lamp lights up.
• A small amount of power is consumed even in standby
mode. To turn the power off completely, unplug the AC
power cord.
SOURCE
DIGITAL IN
FM AUX
AUDIO VOL
DOWN - TUNING - UP
indicator lights up on the display.
indicator also
on the front
AUDIO
VOLUME
15