Tuner Operations; Setting The Am Tuner Interval Spacing; Tuning In Stations - JVC TH-A25 Instructions Manual

Tuner Operations

TV
DIMMER
Number
1
buttons
5
9
FM/AM
DVD FM/AM
TV CH
TV VOL
TOP
MENU
CHOICE/TIME
¢/4
AUDIO SUBTITLE ANGLE ZOOM
SLOW RETURN
PROGRESSIVE NTSC/PAL
RM-STHA25U
DVD CINEMA SYSTEM
For basic tuner operations, see "Basic Tuner Operations" on page
15.

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and other countries
use 10 kHz spacing. Select the appropriate interval spacing setting
to receive the AM broadcasting in your area.
• 9 kHz interval spacing is the initial setting.
• Each time you do the following procedure, the AM tuner interval
spacing alternates between 9 kHz and 10 kHz.
From the remote control ONLY:
1
Select AM as the band.
2
Press the number buttons in the following order:
9, 1, then 0.
The new setting for the interval spacing appears on the display.
• Each time you press the three number buttons (9, 1, and 0),
the AM tuner interval changes as follows.
AM–10K
(10 kHz)
AM–10K: Select this to set 10 kHz interval spacing.
AM–9K: Select this to set 9 kHz interval spacing.
34
AUDIO
SLEEP
2 3 4
6 7 8
MEMORY
0
MEMORY CANCEL
SOUND
AUX
CONTROL TEST TONE
TV
TV/VIDEO MUTING
AUDIO VOL
MENU
ENTER
ON SCREEN
/
STEP
TUNING
DOWN - TUNING - UP UP/DOWN
PL REPEAT FM MODE
FM MODE
AM–9K
(9 kHz)

Tuning in Stations

From the remote control:
1
Press FM/AM repeatedly to select the
band.
The last received station of the selected band is tuned
in.
• Each time you press the button, the band alternates between
FM and AM.
2
Press and hold TUNING UP or
DOWN.
• TUNING UP: Increases the frequency.
• TUNING DOWN: Decreases the frequency.
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
• When you press the button repeatedly, the frequency changes
step by step.
On the front panel:
1
Press SOURCE repeatedly until the
desired band (FM or AM) appears on the
display.
The last received station of the selected band is tuned in.
• Each time you press the button, the source changes as follows:
DVD/CD
AM
2
Press 7 so that "MANUAL" appears on
the display.
• Each time you press the button, the operation mode of
¢ and 4 buttons alternates between "PRESET" and
"MANUAL."
Select this for using ¢ and 4 as the
PRESET:
buttons to select the preset station.
MANUAL: Select this for using ¢ and 4 as the
buttons to change the frequency manually.
3
Press and hold ¢ or 4.
• ¢: Increases the frequency.
• 4: Decreases the frequency.
The system starts searching for stations and stops when a station
of sufficient signal strength is tuned in.
• When you press the button repeatedly, the frequency changes
step by step.
Notes:
• When a station of sufficient signal strength is tuned in, the
indicator lights up on the display.
• When an FM stereo program is received, the
lights up.
FM/AM
DOWN - TUNING - UP
SOURCE
DIGITAL IN
AUX
FM
indicator also