Onick LS320 User Manual
  1. Manuals
  2. Brands
  3. Onick Manuals
  4. Measuring Instruments
  5. LS320
  6. User manual

Onick LS320 User Manual

Handheld laser speedometer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Onick LS320
Handheld Laser Speedometer
USER MANUAL
1

Advertisement

Table of Contents
loading

Related Manuals for Onick LS320

Summary of Contents for Onick LS320

  • Page 1 Onick LS320 Handheld Laser Speedometer USER MANUAL...

  • Page 2: Table Of Contents

    Contents: 1. Product Introduction 2. Product parameters 3. Product view description 4. The initial screen 5. Backlight switch 6.Measure mode 7.Speed unit 8.Distance unit 9.Restricted speed 10.Environment mode 11.How to switch the Speed mode /distance mode 12. Telescope sighting device 13.

  • Page 3: Product View Description

    3. Product view description 4. The initial screen Firstly, Install the battery handle into the bottom of the device, press the PWR button one time to start the device,it will enter the standby mode,and the backlight is lighting up ,see below,...

  • Page 4: Backlight Switch

    Press the PWR button again to turn it off. 5. Backlight switch Press and hold on the HUD button for 3 seconds, the backlight will be shut down. Press the HUD button for another 3 seconds ,it will restore the backlight status. PIC 1：Backlight in shutting down status PIC 2：Backlight in lighting up status 6.

  • Page 5: Speed Unit

    PIC3 PIC4 PIC5 PIC6 7. Speed unit Press the ▲button to switch the speed unit ,you can switch into the KM/H, M/H, M/S, Default at KM/H. 8. Distance unit Press the ▲ button to switch the Distance unit ,you can switch into the M,Y,Default at M. 9.

  • Page 6: Environment Mode

    250KM/H. 10. Environment mode Press the ▲ button to set the Normal,bad weather ,Default at Normal. 11.How to switch the Speed mode /distance mode In the default operation interface, Press the▲button to switch the different modes, then aim the target to test,you will get the distance and the speed. 11.1 V:---- D:----- speed and distance mode (PIC1) In speed and distance mode, aim at the target to get the speed and distance, the LCD and screen will display the running speed and distance data .
  • Page 7 test, the LCD and screen will display the distance data. 11.4 V:---- D:----- (H) speed and distance lock mode (PIC 4) Directly press the▲button to switch into the speed mode and distance lock mode (H), aiming at the target to test, the LCD and screen will display the locked speed and distance data.

  • Page 8: Operation Panel Description

    T1 : Display the current measured speed T2 : + / - is the driving direction of the vehicle , + for coming, - for going. T3 : Aiming at the license plate through the central aiming rectangle T4 : Display the current measured distance 13.Operation panel description: 13.1.

  • Page 9: Important Safety And Product Information

    heat, cracking or igniting the battery. Note: Lithium-ion batteries are unstable (potentially dangerous) at extremely low and high temperatures Charging temperature range: 0° C to 45°. Charging temperatures outside this range may cause the battery to become hot or cracked, or probably damage the battery's performance and reduce the expected battery life.
  • Page 10 Warnings: Do not stare at laser beam for a long time. This product is designed in accordance with human eyes safety laser Class 1. It means that in normal conditions human eyes will not be damaged by directly looking at laser. But for any laser equipment, proper protective measures are to be grasped in operation.

Table of Contents