Advertisement
A
B
B
1. Take out the inner tent and lay it out flat ensuring the
door is completely zipped closed.
2. Assemble the fibreglass poles.
3. Insert the longest fibreglass pole(A) across the
crossed pole sleeves.The other poles[B) across the
parallel pole sleeves.( do not attach G hooks).
1. Cover the inner tent with flysheet.
2. Fix the tie on the fly to wrap the poles to secure the fly.
3. Secure the flysheet by pushing the pegs through the
elastic tape into the ground.
A
A
1. Secure one end of each pole to a corner pin. With one
person pushing the first pole in order to create an arch,
the second person supports the centre of the tent, raising
the poles off the ground and ensuring the arch is even and
the sleeve is placed evenly in the centre of the pole.Oper-
ate the second rod in the same way. Attach the G hooks to
the poles.
2.Install parallel poles, pushing the first pole in order to
create an arch, Secure one end of each pole to a corner
pin. Attach the G hooks to the poles.
C
1. Use the guy ropes and steel pegs to secure the
assembled tent to the ground.
2. Both flysheet doors can set up by steel poles to
create an awning.
Advertisement
