Procedure For Disassembly And Reassembly - Hitachi RAC-25WXEN Service Manual

Procedure for Disassembly and Reassembly

OUTDOOR UNIT
MODEL RAC-25/35WXEN
1. Electrical parts
(1)Remove the service value cover lock screws
and lower the cover to remove it.
(2)Remove the top cover lock screw and raise the
cover to remove it.
(3)Remove the electrical box lock screw.
(4)Remove the terminal cover lock screw.
(5)Remove each connector and earth cable from
h t e e l a d w r i . e T h e
Fig. 1
Fig. 2
, n e r m o v e h t e e e l c r t c i
OUTDOOR UNIT
1. Electrical parts
(1)Remove the service value cover lock screws
and lower the cover to remove it.
(2)Remove the top cover lock screw and raise the
cover to remove it.
(3)Remove the front cover lock screw.
(4)Lower the right side of the front cover and pull
it forward. Then, remove the cover from the
hook.
(5)Pull the right side of the front cover a little and
pull up the left side to remove it from the hook.
(6)Remove each connector and earth cable from
the lead wire. Then,remove the electrical box.
a b l o . x
20
MODEL RAC-50WXEN
Fig. 3
Fig. 4