Time-Setting Options; Setting The Timer; Setting The Time - Bosch HGQ329I50S Instruction Manual

Free standing cooker
Table of Contents

Advertisement

Time-setting options

en
OTime-setting options
T i m e - s e t t i n g o p t i o n s
Time-setting option Use
Timer
The timer functions like an egg timer. It runs
Q
independently of the appliance when it is
heating and does not affect the appliance.
Clock time
When the timer is not running in the fore-
v
ground, the appliance will show you the time
of day on the display.
An audible signal sounds once the timer duration has
elapsed.

Setting the timer

You can use the timer regardless of whether the
appliance itself is in use.
The maximum time that can be set is 23 hours 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments. The higher the value, the
larger the increments.
The timer duration starts at a different default value,
depending on which button you touch first:
5 minutes if you touch the
you touch the
button.
@
Touch and hold the
1.
symbol
is selected.
vQ
Use the
A
or
@
button to set the timer duration.
2.
After a few seconds, the timer duration will start to
count down.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
A
or
@
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
button to reset the timer duration
A
all the way to zero. The timer is now switched off.

Setting the time

When the appliance is connected to the power supply
or following a power failure, the time flashes in the
display. Set the time.
Press the
button.
v
1.
The time stops flashing.
Use the
or
button to set the time.
A
@
2.
The appliance applies the settings after a few seconds.
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
22
button and 10 minutes if
A
button until the timer
v
button to change the timer
To do this, touch and hold the
flashes, and then use the
time.
button until the time
v
or
button to change the
A
@

Advertisement

Table of Contents
loading

Table of Contents