Advertisement
Quick Links
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and
avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should
be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a
regular basis to provide additional protection from sratches and spills. How often you apply
the wax depend on how much wear the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
PIECE
DESCRIPTION
A
Headboard /
Footboard
PIECE
DESCRIPTION
B
Side Rail
C
Center Slat
D
Support Leg
Part List BOX #1
PICTURE
Part List BOX #2
PICTURE
C O U T U R E
BSC2000 - Q
DIMENSIONS: 62.1"L x 82.8"D x 13.6"H
QUANTITY
2x
QUANTITY
2x
1x
WEIGHT CAPACITY: 800 LBS
4x
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
Advertisement
Related Manuals for Safavieh Furniture BSC2000-Q
Summary of Contents for Safavieh Furniture BSC2000-Q
- Page 1 CARE AND MAINTENANCE Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish.
- Page 2 Part List BOX #2 PIECE DESCRIPTION PICTURE QUANTITY C O U T U R E Phillips Head Bolt (8x20mm) Spring Washer (M8) BSC2000 - Q DIMENSIONS: 62.1“L x 82.8“D x 13.6“H Flat Washer (M8) Allen Bolt (6x40mm) Wood Screw (8x31mm) Allen Key 4mm Part List BOX #3 PIECE...
- Page 3 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list If any part is missing or damaged, do not attempt to assemble the product. Estimate Assembly Time : 30 minutes. Tool Required : Phillips Head Screwdriver (not provided) Step 1 Attach the siderail (B) to the headboard / footboard (A) using phillips head screwdriver to lock phillips head bolt (E), spring washer (F) and flat washer (G).
- Page 4 T-NUT Step 2 Step 4 Step 3 Arrange center slat (C) so that t-nuts are facing the floor. Attach slat roll (K) to the center slat (C), using Attach slat roll (K) on the bed frame, using Slide allen bolt (H) from top of center slat (C) into the 2nd, allen key (J) to lock with allen bolt (H).
-
Page 5: Appendix A : Adjustable Mattress Base Assembly Supplement
APPENDIX A : ADJUSTABLE MATTRESS BASE ASSEMBLY SUPPLEMENT An adjustable mattress base is a freestanding mattress support that sits within the perimeter of the bed frame. If using this bed frame with a standard box spring or foundation these instructions do not apply. Pre-assembled side rail cleats obstruct adjustable base installation and operation.