Set Up; Operation - ETEKCITY CL10 User Manual

Set Up

1. Flip the lantern over and twist
the battery compartment lid
counterclockwise to remove it.
2. Remove the insulation strip.
[Figure 1.1]
3. Replace the battery
compartment lid.

Operation

1. Pull up on the handles to
turn on the lantern.
[Figure 2.1]
Note: Adjust the height to
control the amount of light
emitted from the lantern.
2. Fully collapse the lantern to
turn it off.
[Figure 2.2]
Note: If you're not using the
lantern for an extended period
of time, remove the batteries to
avoid power drainage.
Figure 1.1
ON
[Figure 2.1]
OFF
[Figure 2.2]
EN
5