Etekcity CL10 - Camping Lantern Manual

Safety Information

Please read and follow all instructions and safety guidelines in this manual.

General Safety

• Do not dispose of any part of the lantern in a fire.
• Do not submerge or place the lantern in direct contact with water or any other liquid.
• Do not replace batteries while hands are wet or while the lantern is in a wet environment.
• Do not shine the light directly into eyes.

Use & Care

• When not in use, turn off the lantern by completely collapsing the lantern.
• When installing or changing batteries, make sure to place the batteries in the correct polarity.
• Using batteries that are not alkaline may shorten the operating time of the lantern.
• When cleaning, use a damp or dry cloth to wipe the lantern's surface.
• When not in use for an extended period of time, remove the batteries to avoid power drainage.
• Dispose of all parts of the lantern in accordance with local environmental regulations. Do not dispose of the lantern or batteries in regular household waste.

Function Diagram

1. Handles
2. LED Lantern Light
3. Battery Compartment

Specifications

Set Up

1. Flip the lantern over and twist the battery compartment lid counterclockwise to remove it.
2. Remove the insulation strip. [Figure 1.1]
   
3. Replace the battery compartment lid.

Operation

1. Pull up on the handles to turn on the lantern. [Figure 2.1]
   
   Note: Adjust the height to control the amount of light emitted from the lantern.
2. Fully collapse the lantern to turn it off. [Figure 2.2]
   
   Note: If you're not using the lantern for an extended period of time, remove the batteries to avoid power drainage.

Replacing Batteries

1. Turn off the lantern.
2. Flip the lantern over and rotate the battery compartment lid counterclockwise to remove it. [Figure 3.1]
   
3. Remove the old batteries and install new batteries, making sure they are placed in the correct polarity. [Figure 3.2]
   
4. Replace the battery compartment lid by rotating it clockwise. [Figure 3.3]