Configuration Information Settings - Hitachi GS4000 Series Quick Start Manual

GS4000 Quick Start Guide, Revision 3

5.2 Configuration Information Settings

5.2 Configuration Information Settings
This section describes how to set configuration information based on the example 1 and 2 given in the section "5.1
Configuration Examples".
You can use the function of simplifying command inputs when setting configuration information.
(See the section "8.1 Convenient Functions".)
(1) Enter the edit mode to set configuration information
Enter the edit mode to set configuration information.
BSDI BSD/OS 3.1
newuser
login:
Password: ********
All Rights Reserved,Copyright(C)2003,2004,Hitachi,Ltd.
*** Welcome to the system ***
> enable
********
Password:
configure
#
(config)#
NOTE After entering the edit mode of configuration definition, a configuration information file will be
opened automatically. Note that the example above is for the case where an active configuration
information file on memory is opened. You can open a designated spare file for configuration
information by inputting a file name after the "configure file" command.
For details about a spare configuration information file, see the GS4000 Software Manual
Configuration Settings CLI-CLI Type 1 Hierarchical Input Format-.
40
...Input a user ID.
...Input a login password.
Register yourself as an administrator of GS4000.
...
...Input a password of administrator.
...Enter the edit mode.
QSGGS4KX10-00 5794092-2X