Special Instructions - Husqvarna TS 73 R Owner's Manual

This symbol indicates that the machine is
in conformance with the applicable
European directive.

SPECIAL INSTRUCTIONS

The disc cutter is designed to provide safe and
reliable service in operating conditions corresponding
with the instructions, but it can present dangers for
the user and risks of damage, consequently regular
on site inspection is necessary to ensure :
• Perfect technical condition (use for the purpose
for which it is intended and taking into account
any risks, and correction of any malfunction
detrimental to safety).
• Use of a diamond disc for water lubricated
cutting of marble, stone, granite, brick and
facings (porcelain, glazed tiles, ceramics, etc).
The use of any other disc is forbidden (abrasive,
saw, etc).
• Competent personnel (qualifications, age,
training, education) who have studied the manual
in detail before starting work: any fault of an
electrical or other nature must be checked by a
competent person (electrician, maintenance
foreman, authorized dealer, etc).
• That the warnings and instructions marked on
the machine are followed (adequate personal
protection, correct use, general safety
instructions, etc).
• That no modification, transformation or addition
is detrimental to safety and that it is carried out
without prior authorization from the manufacturer.
• Respect of the maintenance intervals and
periodical checks recommended.
• That only genuine spare parts are used for
repairs.
MANUFACTURER
TYPE
TYPE
W I E G H T
M A S S E U T L I
MAXI TOOL
Ø MAXI OUTIL
BORE
Ø ALESAGE
SPEED
T/MN - RPM
1 Use
• Use : Sawing porcelain, glazed tiles, ceramics,
etc...
• Tools : Water lubricated diamond
8
Instruction plate
N° SERIE
ANNEE DE
FABRICATION
E K g PUISSANCE k W
PLAGE DE
mm V
TENSION
mm FREQUENCE Hz
INT. UTIL. A
disc diameter 300 mm - bore 25.4
mm (AL).
(Information from your usual
supplier).
Carborundum
Do not use the saw for any purpose for which
it is not designed (using a saw blade or
abrasive disk which do not conform to the
instructions for use).
SERIAL
FABRICATION
YEAR
P O W E R
VOLTAGE
FREQUENCY
INTENSITY
Saw blade
disc
65
65
0,3