Fiem COSMO Instructions Manual

INSTRUCTIONS FOR INCUBATOR MOD. "COSMO &
COSMO EVO"
Cosmo represents, in any way, the new incubation frontier as each detail of this appliance has
been conceived to ensure excellent performance together with a unique and exclusive design.
It results from F.I.E.M. experience, reached and applied on field in years of dedicated research
and drilled-down studies on incubation technique.
B E F O R E U S E
Before using the incubator, it is recommended to study the Instruction Manual, especially the
technical and safety data aspects, in order to gain an understanding of the components and the
potential operation of the machine.
MACHINE UNPACKING
Take the incubator out of its cardboard box and remove the internal components which are
secured by the adhesive tape and check that they are intact.
Check the following components are included:
• 1 no. adjustable egg-turning grid;
• 1 no. mesh shelf;
• 1 no. dial hair hygrometer;
• 1 no. °F alcohol thermometer;
• 1 no. Instruction Book;
The incubator is supplied with a single phase electric cable (approx. 2 mt.) with a plug for the
electric connection 230V, 50/60 HZ.
On the back of the machine, the data plate gives full details regarding the voltage, power
requirements, registration number and production date.
IMPORTANT: Remember to check thermometer is working correctly, examining that there are
no breaks in the line of alcohol
POSITIONING AND PREPARATION
The area where the machine is placed should be well ventilated and dry, at a constant
temperature between 17-23 °C. Place the incubator on a flat, level surface and near to an
electric socket for easy access.
Use only the electric plugs supplied, with earth connection.
PLEASE NOTE: The manufacturer declines every responsibility in case of any improper use or
improper placement, connection to any unauthorized apparatus or tampering from unauthorized
personnel.
1. Before using the machine, remember to clean it carefully inside and outside, as shown in
the relative paragraph.
2. Insert the thermometer into its clip on the left side of the egg turning grid and adjust it so
that its bulb is level with the centre line of the eggs.
.
1