Advertisement
Quick Links
FH-TRI
Thank you for purchasing our modern triangular shelf brackets.
These brackets are designed for 8" deep real wood shelves, 5/8" or thicker.
Please read these instructions from start to finish before beginning.
For any issues or questions contact support@fibrehead.com
-Always check/detect routing of pipes and electrical before penetrating/drilling walls.
Parts
Included
Stud Finder
Tape Measure
45degree Cut Shelf
Any Issues or questions contact Support@fibrehead.com
Modern Shelf bracket set
Tools Required
6mm or 1 /4" Drill bit
Pencil
Decide on which configuration you prefer.
Shelf length should not exceed 5' or 60"
without additional brackets.
Hardware
Included
(8x)
5/8" Wood Screw
For wood Shelf
(4x)
2.5" Wood Screw
For wall studs
Drill and Philips bit +
Or
Straight Cut Shelf
(8x)
1" Wood Screw
For drywall anchors
(8x)
Drywall
Anchors
Level
Safety Glasses
Advertisement
Related Manuals for FibreHead FH-TRI
Summary of Contents for FibreHead FH-TRI
- Page 1 These brackets are designed for 8” deep real wood shelves, 5/8” or thicker. Please read these instructions from start to finish before beginning. For any issues or questions contact support@fibrehead.com -Always check/detect routing of pipes and electrical before penetrating/drilling walls.
- Page 2 2.Place 8” Shelf on brackets and mark lines for cuts. Cut shelf to length desired. -Most hardware stores will do cuts if requested- Sand and finish shelf as desired. 3. Fasten shelf with 5/8” screws (x8) , Finished. Pencil Drill and Philips bit + Any Issues or questions contact Support@fibrehead.com...
Need help?
Do you have a question about the FH-TRI and is the answer not in the manual?
Questions and answers