Clarion DXZ866MP Owner's Manual page 30

Common Operations
Setting the clock (CLOCK)
When the power is OFF, the clock is displayed.
The clock is displayed in 12-hour format.
1. Press the [ADJ] button.
2. Touch [APPEARANCE].
3. Touch on the left slide button to select
"CLOCK EDIT" and touch [ENT].
ADJ APPEARANCE
CLOCK EDIT
The time (e.g. "2pm:45") currently set on this
unit is displayed, and the mode changes to
the time setting mode.
4. Touch on the left slide button to set
hours.
ADJ APPEARANCE CLOCK
2pm
SET
∗ If you operate another button while you
are setting the time, the time is not
adjusted.
5. Touch on the right slide button to set
minutes.
6. Touch [SET].
∗ You will hear a long beep, and the time is
set.
Notes:
• The clock cannot be adjusted when the power is
OFF.
• When the battery has been removed for
maintenance or for repair, set the time again.
7. Press the [ADJ] button to return to the
original mode.
Displaying messages (MSG
INFO)
This function allows you to display a message
on the display when no operation is performed
for more than 30 seconds.
• The factory default setting is "OFF".
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
30
DXZ866MP
[ ENT ]
RTN
: 45
RTN
3. Touch on the left of the display to
select "MSG INFO".
ADJ APPEARANCE
MSG I N F O
4. Touch on the right of the display to
select "ON" or "OFF".
5. Press the [ADJ] button to return to the
original mode.
Entering messages to display
in message information (MSG
INPUT)
• Up to 30 characters can be entered.
• The factory default setting is "Welcome to
Optimedia".
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [APPEARANCE].
3. Touch on the left of the display to
select "MSG INPUT".
ADJ-APPEARANCE
MSG INPUT
4. Touch [ENT].
The mode changes to the message entry
mode.
5. Touch [ ]/[ ] to determine the entry
position.
MESSAGE INPUT
We I come
A
FONT
MEMO
6. Touch on [FONT] to select the type of
text.
Each touch of
text. For details, see page 27.
7. Touch on [TEXT] to determine the
character to enter.
8. Repeat steps 5 to 7 to enter the message.
9. Touch [MEMO].
You will hear a long beep, and the message
is stored in memory.
10. Press the [ADJ] button to return to the
original mode.
O F F
RTN
[ ENT ]
RTN
to
A-Z
TEXT
RTN
switches the type of