TH-42PHW6EX / TH-42PHD6EX / TH-42PHD6BX / TH-42PHD6UY
10.2. Pedestal setting (B)
INPUT
1
RGB(PC)
Gray Scale
Pattern
Black 2 %
Black 0 %
2
Component
(525i, 525p, 625i,
720i or 1080i)
Gray Scale
Pattern
Black 2 %
Black 0 %
Note:
OSD is the difference between UY model and Except UY model.
Picture: Normal (Except UY)/Standard (UY model)
White balance (Except UY)/Color Temp (UY model)
Equipment
Setting
Picture:
PANEL W/B
Normal
White balance:
Cool
Aspect:
Chroma Control:
16:9
COMPONENT
RGB Sub Adjust:
/RGB-IN: RGB
Chroma Control:
RGB Sub Adjust:
Chroma Control:
RGB Sub Adjust:
Picture:
Normal PANEL W/B
White balance:
Cool PANEL W/B
Aspect:
16:9
Alignment menu
** Adjust at the dark room.
R cut off 1) Press the SWAP button, change input to signal path.
2) Set R,G and B cut off to "
G cut off
B cut off
Gun off 3) Set Gun off to " 5 ". (Only green pixels can emit.)
G Sub Bright 2 4) Adjust G Sub bright to start some of green pixels emission
at black 2% area and no emission at black 0% area.
Gun off 5) Set Gun off to " 3 ". (Only blue pixels can emit.)
B Sub Bright 2 6) Adjust B Sub bright to start some of blue pixels emission
at black 2% area and no emission at black 0% area.
Gun off 7) Set Gun off to " 6 ". (Only red pixels can emit.)
R Sub Bright 2 8) Adjust R Sub bright to start some of red pixels emission
at black 2% area and no emission at black 0% area.
1) Change input to Component signal.
R,G,B cut off 2) Repeat procedure 1) to 7) of RGB input signal.
R,G,B Drive
18
Procedure