Table of Contents
Advertisement
750W 20cm
Electric
POLE SAW
S7520EPS
1 of 25
Important - Please read these instructions fully
before starting assembly
These instructions contain important information that will help you get
the best from your pole saw, ensuring it is assembled correctly and safely.
If you need help or have damaged or missing call the Customer Helpline
V1.5 05/21
on 0345 605 2067
ORIGINAL
INSTRUCTIONS
Please retain for future reference
WARNING! This product must NOT be used
before rst lling the Chain Oil reservoir
with a specialist Chain Oil (not supplied,
available to purchase separately).
AFTER SALES SUPPORT
0345 605 2067
SAN NO.: 03218AAAI011
AFTER SALES SUPPORT 0345 605 2067
V1.5 05/21
1 of 25
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Spear & Jackson S7520EPS
Summary of Contents for Spear & Jackson S7520EPS
- Page 1 INSTRUCTIONS Please retain for future reference 750W 20cm Electric POLE SAW S7520EPS WARNING! This product must NOT be used before rst lling the Chain Oil reservoir with a specialist Chain Oil (not supplied, available to purchase separately). 1 of 25 V1.5 05/21...
- Page 2 SPEAR & JACKSON SINCE 1760 For more than 250 years gardeners have enjoyed high quality performance and great results using Spear & Jackson tools. Our garden power tools combine continuous innovation and the latest in manufacturing technologies with a proud heritage. Each product is carefully designed with performance, comfort and durability firmly in mind, which has earned Spear &...
-
Page 3: Table Of Contents
CONTENTS SAFETY INFORMATION Description of symbols General power tool safety warnings Work area safety Electrical safety Personal safety Power tool use and care Residual risks Intended use/Not intended use IN THE BOX Parts List ASSEMBLY PREPARE Lubrication Remove the bar sheath Install the shoulder strap Adjust the pole length Adjust the blade head... -
Page 4: Safety Information
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine DESCRIPTION OF SYMBOLS Some of the following symbols may be marked on your product. Be sure to study them and learn their meaning. Proper interpretation of these symbols will allow you to use the machine more effectively and reduce the risk of accident. -
Page 5: General Power Tool Safety Warnings
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all Electrical safety safety warnings and all a) Power tool plugs must instructions. match the outlet. Never modify the plug in any Failure to follow the way. -
Page 6: Personal Safety
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine unplugging the power of inattention while tool. Keep cord away operating power tools from heat, oil, sharp may result in serious edges or moving parts. personal injury. Damaged or entangled b) Use personal protective cords increase the risk of... -
Page 7: Power Tool Use And Care
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine left attached to a rotating application.The correct part of the power tool power tool will do the may result in personal job better and safer at injury. the rate for which it was designed. -
Page 8: Residual Risks
SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine of untrained users. Residual risks e) Maintain power tools. Even if you use this electric Check for misalignment power tool in accordance or binding of moving to instructions, certain parts, breakage of parts residual risks cannot be and any other condition... - Page 9 SAFETY INFORMATION Please read these instructions fully before operating or maintaining your machine WARNING-DO NOT HANDLE CHAIN OIL UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ AND UNDERSTOOD. Intended use/Not intended use The polesaw with telescoping arm is intended for removing branches from trees.
-
Page 10: In The Box
IN THE BOX PARTS Guide bar Sponge sleeve Saw chain Seat for shoulder strap Cap knob (red) for guide bar tension Rear handle Cap of oil tank Switch on/off Chain tension wheel Lock-off button Cover of guide bar and saw chain Shoulder strap Adjusting Button, for head angle (30 Sheath of guide bar and chain... -
Page 11: Assembly
ASSEMBLY Unpacking i. Unpack all parts and lay them on a flat, stable surface. ii. Make sure all parts and accessories are included and undamaged. If you find that parts are missing or show damage please contact the after sales service at 0345 605 2067. - Page 12 ASSEMBLY Assembling the pole saw Before using the pole saw, a one-time assembly is required. When removed from the box, the two parts are disconnected as shown in photo below. i. Assembling the working head to the telescopic pole handle. When inserted, the working head (A) would have to line up with the telescopic pole handle (B), and must be inserted fully.
-
Page 13: Prepare
PREPARE Lubrication (Chain saw chain oil) Fill the oil tank with 100ml of specialist chain oil(not supplied,available to purchase separately) and keep oil topped up during use. Precautions for safe handling of Chain Saw Chain WARNING Do not eat, drink or smoke during use. Only use in a well-ventilated area to prevent build- up of excessive levels of vapour. -
Page 14: Remove The Bar Sheath
PREPARE Remove the bar sheath Install the shoulder strap Shoulder strap is necessary for your cutting work,and efficient, comfortable and safe working of this machine. Adjust the pole length Adjust the length of the pole saw according to working situation. lock Pull the lever of the quick clip to release the pole. -
Page 15: Adjust The Blade Head
PREPARE Adjust the blade head The pole chain saw head can be rotated for different cutting angles from 0º to 30º. Turn the adjusting knob for head angle push counterclockwise to loosen the head. Adjust the head to the desired position. Push pivot button and adjust pole saw head until it snaps securely into place at one of the four positions indicated by the notches. -
Page 16: Operation
OPERATION Switching on/off Connect the garden tool plug to a power supply. Fix the supply cord through cord retainer. NOTE: Grasp the telescopic pole with your left hand and the rear handle with your right hand. To start the blade movement, push the lock-off button (A) and then pull the switch trigger (B). -
Page 17: Hold The Machine
OPERATION Hold the machine Balance your weight with both feet on solid ground. Your body should always be to the left of the chain line. Grip handle tightly. The most typical cutting application is to position the unit at an angle of 60°or less depending on the specific situation. -
Page 18: Maintenance
MAINTENANCE Motor Cooling To avoid overheating and damage to the motor, always keep the cooling air vents clean and free of sawdust and debris. Adjust the chain tension Always check the chain tension before use, after the first cuts and regularly during use, approx. every 10 minutes. Loosen the bar locking knob (the inner circle) anti- clockwise slightly, but do not remove the side cover. -
Page 19: Change The Chain And Bar
MAINTENANCE Change the chain and bar Loosen tension wheel (A). Remove chain cover (B) with adjusting wheel together. Fit the chain around the bar ensuring that the direction of the chain is as depicted in the picture on the bar. Fit the Chain slide direction chain on the sprocket. -
Page 20: Storage
MAINTENANCE Replace a bar with any of the following faults: · wear inside the bar rails permitting the chain to lay over sideways · bent guide bar · cracked or broken rails · spread rails Regularly inspect the bearing surfaces of the guide bar for damage, turn the saw over, check the underside of the guide bar, and make sure that the lubrication holes and chain groove are free from impurities, if not, clean them with a suitable tool. -
Page 21: Transportation
MAINTENANCE Transportation Switch the product off and disconnect it from power supply before transporting it anywhere. Ensure guide bar cover is fitted. Always carry the product by its handle. Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles. Secure the product to prevent it from slipping or falling over. -
Page 22: Technical Data
TECHNICAL DATA Model number S7520EPS Rated voltage 230-240V~50Hz Replacement fuse rating Rated input power 750W No-load speed 6500/min Guide bar length 200mm (8”) Oil tank capacity 100ml Chain speed 12.5m/s Telescopic handle adjustment range 1.92~2.60m Protection class Degree of protection... - Page 23 TECHNICAL DATA Spare parts list Part number Accessories 91PJ033X (Oregon) Chain 080SDEA041 (Oregon) 200mm (8”) Guide bar WARNING - A specialist chain oil (not supplied,available to purchase separately) will usually contain inhibitors against oxidation damage, have anti-wear properties and a high tack additive to help the oil stick to the bar and chain during use.
-
Page 24: Troubleshooting
TROUBLESHOOTING Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an authorised service centre (call the helpline on 0345 605 2067) if you cannot solve the problem yourself! -
Page 25: Guarantee
WARRANTY If your device develops a fault, please don’t hesitate to contact our customer service department on 0345 605 2067, we aim to solve 80% of problems via the phone. These warranty terms cover additional warranty rights and do not affect your statutory warranty rights.
Need help?
Do you have a question about the S7520EPS and is the answer not in the manual?
Questions and answers