Related Manuals for AGT BDRC48
Summary of Contents for AGT BDRC48
- Page 1 AGT Industrial Product manuals Skid Steer Articulating Brush Cutter Model:AGT-BDRC48 Ver.1.1.4 https://www.agrotkindustrial.com/...
- Page 2 https://www.agrotkindustrial.com/ Directory Product introduction 1/17 Operator 2/17 Safety precautions 3/17 Technical parameters 4/17 Installation 7/17 Handing safety 10/17 Limited Warranty 17/17...
-
Page 3: Product Introduction
Product introduction 1. AGT BDRC48 swing mower uses three oil cylinders to adjust the lifting and side swing, It is an excellent choice for clearing pond banks and cutting trails! 2. The blade of AGT BDRC48 brush cutter is made of boron steel. - Page 4 https://www.agrotkindustrial.com/ Operator Congratulations on owning this 48'' Skid Steer Articulating Brush Cutter! Your Skid Steer Articulating Brush Cutter are carefully designed and manufactured to provide you with years of reliable service. Your 48'' Skid Steer Articulating Brush Cutter will need some minor maintenance to keep it in excellent working condition.
-
Page 5: Safety Precautions
https://www.agrotkindustrial.com/ Safety precautions BEFORE OPERATION 1. The operator must read the operation manual carefully before installation, operation or maintenance. Improper operation will cause the machine damaged or the operator dead. 2. Read all the safe signs and safe declarations. Obey all the professional safe terms, local laws or the professional directions. -
Page 6: Technical Parameters
Technical parameters BDRC48 Model: Max cutting diameter size: 48″ Working pressure (MPa): 56″ Total width: 21″ Total height: 133″ Total length： Total weight：（lb） 16 ~ 21 Suitable pressure（Mpa）: 50 ~ 120 Suitable flow rate（L/min）: Rotate speed（r/min）: Blade： The piston motor drives directly Drive mode：... -
Page 7: Tilt Function
https://www.agrotkindustrial.com/ Technical parameters Tilt Function The Articulating Cutter deck can tilt up 90° from the horizontal position and tilt down 35° from the horizontal position. Use the UP and DOWN buttons on your skid steer’s auxiliary electric controller, or paddle controller to tilt the cutter head. The tilt function is used for cutting on sloped terrain surfaces. - Page 8 https://www.agrotkindustrial.com/ Technical parameters PART DESCRIPTION QTYS NOTE Part 1 Part 2 Part 3 Bolt M12*80 Bolt M16*140 Locking nut M12 Turing Pivot Lock Nut M16 Bolt M16*120 Cover Lock Washer Bolt M8*25 Front pin Flip cylinder Oscillating cylinder sales@agrotkindustrial.com...
-
Page 9: Installation
https://www.agrotkindustrial.com/ Installation Unpack and check Check for missing or damaged components according to the packing list. If you have any questions, please contact the supplier. List of details As the table above: Machine installation Equipment must be installed on a solid concrete floor or similar. If the ground is not firm, it will not be able to connect to the loader. - Page 10 https://www.agrotkindustrial.com/ Installation Connecting Brush Cutter Cont To keep contaminants from entering the hydraulic system; wipe off any dirt or dust from the male or female hydraulic flat face couplers with a clean rag before attaching hoses. Check that the hydraulic hoses are locked into the skid steer couplers before starting the cutter.
- Page 11 https://www.agrotkindustrial.com/ Installation Note: this drawing does not represent the appearance of the equipment For actual purchase, this figure is only for installation location reference. Oil pipe connection: Skid Steer Articulating Brush Cutter is equipped with 3 oil pipes, which are return oil pipe, inlet oil pipe and outlet oil pipe. Connect the tubing to the loader tubing connection.
-
Page 12: Handling Safety
https://www.agrotkindustrial.com/ Handling safety Maintenance Overview The maintenance procedures described in this manual should only be carried out by qualified mechanics who have been trained to repair this machine. Some procedures require special tools and skills to complete. DO NOT attempt to repair or perform service work on this machine unless you have the skills and tools to do so. - Page 13 https://www.agrotkindustrial.com/ Handling safety Maintenance Schedule This brush cutter attachment will provide years of dependable service if routine maintenance procedures are performed. The maintenance tasks listed below are based on normal operating conditions. More frequent maintenance may be necessary with intense use or when operating in adverse environmental conditions. BEFORE EACH MAINTENANCE TASK WEEKLY...
-
Page 14: Storage Tips
https://www.agrotkindustrial.com/ Handling safety Storage Tips To get years of quality use out of your brush cutter, follow these storage tips: Ensure brush cutter is free of debris, dirt, grime and grease. Store your brush cutter in a dry shed or garage. When storing your brush cutter for the season, cover with a weather proof tarp to protect it from the elements. - Page 15 https://www.agrotkindustrial.com/ Handling safety First Time Use Procedure Before operating the brush cutter, check the skid steer’s hydraulic oil level and add oil if necessary. If you are operating the Piston Motor Articulating Cutter (SBCNS) ensure the case drain hose is properly attached to the prime mover’s case drain connection. DO NOT operate this attachment WITHOUT the case drain hose attached.
- Page 16 The first-aid kit information below was directly obtained from OSHA regulations. Having a kit available at the job site is required by OSHA for logging operations and is highly recommended by AGT Manufacturing. The following list sets forth the minimally acceptable number and type of first-aid supplies for first-aid kits required under paragraph (d)(2) of the logging standard.
-
Page 17: Inspection Checklist
https://www.agrotkindustrial.com/ Handling safety Inspection Checklist This checklist is to be completed prior to every use of the tree shear. DO NOT use a tree shear that fails inspection until it has been repaired. Check for damaged hoses or hydraulic leaks. See hydraulic safety precautions in this manual. Grease all Imbrication points. - Page 18 https://www.agrotkindustrial.com/ Handling safety Safely Checking for Hydraulic Leaks WARNING: There is significant risk of injection from the high pressure spray at hydraulic leaks The tremendous energy used to operate the machine and attachments can be stored in the hydraulic system even when the machine engine is off. Very serious injuries from hydraulic fluid injection can seem insignificant at first.
-
Page 19: Limited Warranty
AGT Auger attachments extensions and adaptors.The use of attachments other than AGT Auger Teeth, Pilots, attachments, extensions and/or adaptors, will void all warranty on Auger Drive and Bits.The use of AGT adaptors on unapproved attachments is not sanctioned.A “home-made” or non-standard attachment outside the specifications for the machine will void the warranty. - Page 20 https://www.agrotkindustrial.com/ sales@agrotkindustrial.com...
Need help?
Do you have a question about the BDRC48 and is the answer not in the manual?
Questions and answers
I can't get the cutter head to keep rotating