Grip Adjustment
Pull back the pad
.
Inserting an SD Card
To record to the card, it is necessary to perform media settings. (p. 13)
When no card is available, set media settings to "BUILT-IN MEMORY" for recording.
By default, it is set to "BUILT-IN MEMORY".
Close the LCD monitor.
(Base)
.
* Turn off the power of this unit before inserting or removing a card.
To remove the card
o
Push the card inward once, then pull it out straight.
.
Pad
Adjust the length of the belt
(Base)
For more information, refer to the Detailed User Guide
Attach the pad
Open the cover and insert an
SD card.
http://manual.jvc.co.jp/index.html/
Terminal Side
11