1. Manuals
  2. Brands
  3. IECHO Manuals
  4. Wood Router
  5. 1.8KW Router
  6. User manual

IECHO 1.8KW Router User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1.8KW Router User Manual
1.8KW Router
User Manual
Hangzhou IECHO Science & Technology Co., Ltd.

Advertisement

Table of Contents
loading

Related Manuals for IECHO 1.8KW Router

Summary of Contents for IECHO 1.8KW Router

  • Page 1 1.8KW Router User Manual 1.8KW Router User Manual Hangzhou IECHO Science & Technology Co., Ltd.

  • Page 2: Table Of Contents

    1.8KW Router User Manual Directory Summary............................1 Caution............................1 Mandatory list for 1.8KW debugging..................1 Inspection before test running....................1 Brush......................1 4.1. Collet......................1 4.2. Electric and air circuit................2 4.3. Check router cable..................2 4.4. Check control cable...................2 4.5. Check air circuit..................2 4.6.
  • Page 3 1.8KW Router User Manual 14.3. Solution....................21 IBrightCut..........................Export cutting file........................ 26 Blade.............................26 Troubleshooting........................27 18.1. Emergency stop..................27 18.2. Router cannot be started................27 18.3. Router cannot start.................. 27 18.4. Software serial port in dark status............27 18.5. The tool library cover is not smooth............28 18.6.

  • Page 4: Summary

    1.8KW Router User Manual 1. Summary This instruction is for R&D testers, factory testers, and engineer. The main content is 1.8KW milling cutter automatic router bit changer debugging instructions 2. Caution Press E-stop button when a security risk appeared. 3. Mandatory list for 1.8KW debugging...

  • Page 5: Electric And Air Circuit

    1.8KW Router User Manual 4.3.Electric and air circuit Make sure correct router cable, control cable, air tube connect before test run. Water cooler: Circulate cooling water inside 1.8kw through inlet and outlet pipes 4.4.Check router cable Check router power, controller,( shown in image 1) （...

  • Page 6: Test Run For 1.8Kw Spindle

    Image 2  Parameter setting for software 1. Choose 1.8kw router and select correct serial port. 2. Set the parameter in testmill page, click ON button, spindle run; click OFF button, spindle closed, set the rotation speed in software, then spindle rotation speed changed accordingly.
  • Page 7 1.8KW Router User Manual （ ） image 4 1. IO Function Redefine: define the function of buttons on table. Change the knife(4 steps: 1. Brush rise; 2. Loose the bit;3. Install router bit; 4. Finish, Brush down) 2. The IO function redefines 1: define the function of buttons on table.
  • Page 8 7. Fine-tune height of brush when cleaning cover: control brush down compensation when cleaning the cover. 8. Milling blade control way: 1.8KW router use PC, 350W router use C board. 9. Change tool way: 4041 (auto change)/4040(manual change)/4064 (3.6KW router.) ...

  • Page 9: Manual Change Router Bit (4041)

    1.8KW Router User Manual Manual change router bit (4041) Move the tool head to manual change position (Shown in image 6): Manual change: Take off the router bit and change another one. Button for manual change: TC S/L/C （ ）...

  • Page 10: Manual Change Router Bit (4040)

    1.8KW Router User Manual （ ） image 8 8. Manual change router bit (4040) Set parameter: modify extension parameter Click manual change ICON, the following window pop-up. 1. Click 【Down brush】 , the brush will go down, use wrench to disassembly the bit.
  • Page 11 1.8KW Router User Manual Positioning Positioning hole B hole A Positionin Positionin g Slot A g Slot B 9 bit position （Image 10） CutterServer Auto changer bit page, select shifting correction(router bit library will open automatically).
  • Page 12 Coordinate direction Relationship between movement button and tools movement. Router control method 1.8KW router must select”PC control” Start auto change Select for current model if with auto changing. Position manual If user find the bit not in router bit library when...

  • Page 13: Stick & Paper To Correction Router Bit Library Offset

    1.8KW Router User Manual Brush down After the brush detect material thickness, it will compensation make down compensation (range 0-12.7mm) Router change Spindle down compensation when change router fine-tune bit (to make extra 2mm down) 9.2.Stick & paper to correction router bit library offset Preparation 1.

  • Page 14: Read Front Coordinate Of Positioning Slot A

    1.8KW Router User Manual Read the coordinate and click Read front coordinate of positioning slot A 9.5. Set stick to the central position of slot, make sure it fully touch with each side of slot except bottom side. Select step distance “x 1mm”, move the stick approach to front side of slot;...

  • Page 15: Transfer Value From Positioning Slot To Hole

    1.8KW Router User Manual （image 12） 9.8.Transfer value from positioning slot to hole. After read coordinate of 8 side of two slot, click OK, the software will calculator and transfer value from positioning slot to hole, click OK save to DSP.

  • Page 16: Auto Change Bit Test

    1.8KW Router User Manual Auto change bit test. Cutterserver setting Speed selection 10.1. There are two speed in auto change setting, normal running speed and test speed; untick working speed in extension parameter, then it will be test speed. Router bit library initialization.
  • Page 17 1.8KW Router User Manual （image 14） Instruction for image in library Image Meaning Means no.1 holder is current holder, and ER1 blade on current holder, new router bit not allowed to put on this holder. Means No.2 holder is not empty, with router bit ER62.1...

  • Page 18: Automatic Adjust Depth, Router Bit And Pen Coincide Setting

    1.8KW Router User Manual （image 15） Automatic adjust depth, router bit and pen coincide setting. 11.1. Reading the coordinates of the initialization point 1. Select router head, open CT to offset correction page. 2. Move tool head to AKI position, and down router bit to confirm.

  • Page 19: Router Bit And Pen Coincide

    1.8KW Router User Manual （image 16） （image 17） Router bit and pen coincide 11.2. 1. Use chamfering bit when test coincide of router bit and pen. 2. Open coincide test file(shown in image 18) 3. Output the file and cut, modify the offset parameter to correct position(shown in image 19).

  • Page 20: Automatic Tool Changer

    1.8KW Router User Manual （image 18） （image 19） 12. Automatic Tool Changer Send file, click the start button, perform automatic tool change, observe whether each milling cutter blade is changing normally. If it is dangerous, press the emergency stop button immediately.

  • Page 21: Dust Cleaner

    13.1. Dust cleaner and Router linkage In the 1.8KW Router with auto bit changing system. Dust cleaner is linked with router operation. Dust cleaner start running when Router works, no need open dust cleaner manually.

  • Page 22: Dust Cleaner Operation Test

    1.8KW Router User Manual 1. MAN / O / AUTO， Keep the button at MAN position 2. Keep the button at MAX level 13.2. Dust cleaner operation test Set router MAX. Cutting depth. As 10mm before running, in case break table and felt after second drop.

  • Page 23: Software

    1.8KW Router User Manual 14. Software 14.1. Material library The material library management system window is shown in (image 21). （image 21） 14.2. Material Add, modify, and delete material and material classification information.

  • Page 24: Solution

    1.8KW Router User Manual (image 22) 14.3. Solution Add, modify, and delete cutting Program based on existing materials. 、 (image 23) 【Find】 ① 【Material】-【Find】：Fuzzy search existing Program by entering part of the material name. ② 【Material thickness】 - 【 Find】 ： The existing Program can be searched...

  • Page 25: Ibrightcut

    1.8KW Router User Manual 【Solution items】 ① 【Material classification】：Select in the existing classification, to add new ones. ② 【Material】：Select the materials to be added in the material classification 。 ③ 【Processing method】：Select the processing technology of the current material。 ④ 【Cutting mode】：Select cutting model of current material。...
  • Page 26 1.8KW Router User Manual (image 25) (image 26) ER1: The blade used for the current layer. If the machine includes the automatic tool change function, when blades of multiple layers are inconsistent, the tool will be automatically changed (the blade with * is the recommended blade in the material library).
  • Page 27 1.8KW Router User Manual ③ Cutting depth: Controls the cutting depth of the tool. ④ Fine Cutting: Control the last time cutting depth. ⑤ Compensation method: no compensation, inward offset, outward offset, control the positional relationship between the cutting path and the data, as shown in (Figure 27).
  • Page 28 1.8KW Router User Manual ⑦ Cutting direction: clockwise, counterclockwise, to control the direction of the cut. ⑧ Drilling mode: drill a hole in the center of the circumscribing rectangle of this contour, as shown in image 28. (image 28) ⑨ Compensation value: It affects cutting path, which is invalid in the no compensation mode.

  • Page 29: Export Cutting File

    1.8KW Router User Manual 16. Export cutting file Export cutting file, to start cutting. 17. Blade Milling cutters can be used for acrylic milling, engraving, chamfering, etc. Different functions and materials require different Router blades. (image 29) Place the blades in order, recommend blades refer material library and cutting file.

  • Page 30: Troubleshooting

    1.8KW Router User Manual 18. Troubleshooting 18.1. Emergency stop Fault: On the emergency stop status, click "OK" and the machine restarts. Solution: This is a function of the machine. You can set the emergency stop and restart mode in the software parameters. Two types: restart after restarting the power, and press the “OK”...

  • Page 31: The Tool Library Cover Is Not Smooth

    1.8KW Router User Manual Run in win7 compatibility mode and run as an administrator. 18.5. The tool library cover is not smooth Fault: manually turned on and off the tool library, opened and closed, the cover, there is collision sound or the speed is obviously slow.

  • Page 32: Statement

    This technical document is copyrighted by Hangzhou IECHO Science and Technology Co., Ltd. (hereinafter referred to as IECHO). IECHO does not guarantee any technical documentation, and IECHO is not responsible for any misunderstandings that may be caused by users of this technical documentation.

Table of Contents