Table of Contents
Advertisement
Quick Links
OWNER'S MANUAL
AUTOMATED CEILING MOUNTED DRYING RACK
Patented system
Made in Portugal
BUNGY
MODEL CDH1S -F
Thank you for purchasing a BUNGY drying rack.
Now the ease of drying clothes in a convenient
and environmentally friendly way is at the dis-
tance of a simple assembly.
Before starting the installation of your drying
rack please read this entire manual.
If you have difficulties please contact one of our
installers who can do the assembly for you.
bungy.pt
facebook.com/bungy.pt
Advertisement
Table of Contents
Related Manuals for BUNGY CDH1S-F
Summary of Contents for BUNGY CDH1S-F
- Page 1 OWNER’S MANUAL AUTOMATED CEILING MOUNTED DRYING RACK BUNGY MODEL CDH1S -F Thank you for purchasing a BUNGY drying rack. Now the ease of drying clothes in a convenient and environmentally friendly way is at the dis- tance of a simple assembly.
- Page 2 Screwdriver Drill bit 6mm and 8mm Drilling Set up Where to mount your BUNGY On the roof, indoors, in a sheltered area, need- ing only a power point with live, neutral and earth. Free area of 130cm x 80cm. Should be taken into account the existence of any obstacle to the ascent and descent of the drying rack.
- Page 3 Place the metal structure with the motor by aligning Unscrew the motor cover. its holes with the holes in the ceiling. Place and tighten the screws in the order shown in the image. Secure the wall switch Wiring BUNGY black live brown Motor blue...
- Page 4 Lowers the rack to its lowest position Reprogramming of the limit switches Your BUNGY drying rack is pre-programmed with lower and upper limit switches. These can be changed using the provided key to turn the 2 engine tuning screws. These can be accessed after removing the engine cover.
Need help?
Do you have a question about the CDH1S-F and is the answer not in the manual?
Questions and answers