Care And Maintenance; Fcc Statement - EcoFlow POWER HUB User Manual

Care and Maintenance

1. Use or store this product in an environment with a temperature ranging from -25°C
(-13°F) to 60°C (140°F) and keep this product away from water sources, heat sources,
and metal objects.
2. For safety reasons, do not store this product in an environment where the temperature
is higher than 45°C (113°F) or lower than 0°C (32°F)

FCC Statement

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This equipment may not cause harmful interference, and
(2) This equipment must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
for a long time.
EN
15