Table of Contents
Advertisement
FAULT FINDER
Specifications
Light Source — 635-nm red laser diode and monitor, with multi-quantum well
structure
Central Wavelength — Nominal: 635 nm; Range (typical): 630 nm to 640 nm
Spectral Width — < 2 nm
Peak Power Output* — Into SMF-28 fiber, CW or MOD output mode: 1.0 mW
(0 dBm) maximum, 316 µW (-5 dBm) minimum
Maximum Emitted Power — 5 mW
MOD Output Frequency — < 3 Hz, approximate
Power Requirements — (2) 1.5-volt alkaline batteries
Battery Life — 24 hours in solid mode; 48 hours in blinking mode
Connector Interface — 2.5-mm "quick connect" port (APC-type ferrule coupling
efficiency reduced by > -3 dBm), or snap-on connector adapters
CDRH — Class 3a
Operating Temperature — 14 to 122°F (-10 to +50°C)
Storage Temperature — -40 to +140°F (-40 to +60°C)
Humidity — Up to 95% relative humidity, noncondensing
Size — 1" x 9" (2.54 x 22.9 cm)
Weight — 7 oz. (199 g) with batteries and pouch
*Within specified ambient environment of +20°C to +25°C; APC-type ferrule coupling efficiency reduced by
> -3 dBm; Output power with beam collimator may exceed 1 mW. Product complies with CDRH Class II, 1-mW
maximum without collimator accessory and IEC 825-1: 1993, 5-mW maximum
3
Advertisement
Table of Contents
