Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Grundig POWERMAX Q2
Summary of Contents for Grundig POWERMAX Q2
- Page 1 POWERMAX Q2 PROJECT GF CHASSIS SERVICE MANUAL...
-
Page 2: Table Of Contents
CONTENTS --------------------------------------------------------------------------------------------------------------- File browser REVISION LIST Settings in the USB set-up menu PRODUCT SPECIFICATIONS Basic Playback functions Technical specifications Additional playback functions Functional specifications SMART INTER@CTIVE TV 4.0+ Superior specifications SMART Inter@ctive TV 4.0+ internet ap- PACKAGE CONTENT plications Standard accessories USB keyboard and mouse Optional accessories Introduction to Smart Inter@ctive TV Connection/Preparation Smart Inter@ctive TV 4.0+ home page Connections of the television Navigating the main menu Control elements on the television Playback and other options in the ap- Multi-function switch plications Remote control - main functions Smart Inter@ctive TV 4.0 browser main menu SETTINGS Web browser menu Settings for connecting to the home net- Web browser application work USING AN EXTERNAL DEVICE Tuning television channels... - Page 3 CONTENTS --------------------------------------------------------------------------------------------------------------- cards Tuning analog television channels NETWORK SETUP Changing stored analog Network connection channels Wired network Displaying signal information Wired network settings GENERAL OPERATING PRINCIPLE Wireless network OF THE TV Wireless network settings Block Diagram Changing the TV Name General Operating Principle of the Chas- Searching for all satellite-connected digi- tal television stations automatically DC Power Stage Searching for satellite-connected digital television stations manually OPERATING PRINCIPLES OF CIR- Antenna settings for digital satellite chan- CUIT COMPONENTS nels and searching for channels automati- IC100 Main integrated circuit (IC-SMD cally MSD95M0D BGA TRY) Antenna settings for digital satellite chan- IC200,201,202,203 DDR3 RAM (IIC- nels and searching for channels automati-...
- Page 4 CONTENTS --------------------------------------------------------------------------------------------------------------- Cloner configuration Acoustic management Software version Approved logos CUSTOMER SETTINGS 101 SCHEMATIC IMAGES OF THE CHAS- 101 Chassis DC socket 101 VCC DDR 103 Terrestrial tuner 103 Satellite tuner 104 USB 105 FAILURE/ERROR ANALYSES 105 Sound available but no picture, and back lights illuminated 107 Sound available but no picture, and back lights not illuminated 109 No sound 111 SOFTWARE UPDATE 111 Updating TV Software by means of USB memory 111 Updating software and boot from the user menu...
-
Page 5: Revision List
REVISION LIST --------------------------------------------------------------------------------------------------- Version Revision Date Responsible Department SEK draft issued 28.09.2016 TV Design Application... - Page 6 SAFETY ------------------------------------------------------------------------------------------------------------------------- High temperature and humidity shortens the WARNING lifecycle of the panel. LED panels are not suit- Injuries caused by falling TV set able for use under high temperature and hu- midity conditions. The user should observe the Never set up the TV on unstable places. Other- specified temperature and humidity values. wise the TV can tip over and cause injuries and fatalities. Observe the following precautions Keep it away from harmful (corrosive) gases. especially to protect children from such negative Corrosive gases damage chemical and elec- incidents: tronic structure of the LED panel. Make sure that the stand or other furniture you Static electricity flow may damage the panel. will place the television on is robust enough to LED module contains materials sensitive to carry the television. static electricity such as CMOS, etc. The body should be grounded before touching the Make sure that the TV set does not protrude panel. Also, you should not touch connector beyond the dimensions of the furniture on areas with bare hands. which it is resting. The same image should not stay on the screen Do not place the television on furniture such as for prolonged times. Keeping the same image cupboard, sideboard, bookshelf that tends to on the screen for a long time may lead image tip over. In obligatory cases, such bearers must retention and the panel may get damaged.
-
Page 7: Product Specifications
PRODUCT SPECIFICATIONS -------------------------------------------------------------- Technical specifications Specification Eternity Crystal Energy Class Display Size 40",49",55"" 40",43",49",55" HD Ready Full HD Ultra HD Full HD 50 Hz Full HD 100Hz Sound output 2X15W @ 8 ohm ohm 2X15W @ 8 ohm Onboard Sub-woofer Standby power consumption <0.5W Power input (V/Hz.) 220-240V ~ 50-60Hz Rosh Limits Pb (Lead) / Hg (Mercury) Pb, complies with RoHS Directive / 0 Scart input Standard Sound/Video RCA input Via Scart S-Video socket Via Scart HDMI input 1-2-3 HDMI 2.0 YPBPR input Via Scart VGA input PC audio input Line Out Via Headphones Headphone Socket Standard... - Page 8 Appstore (download-remove- update, move, add favorite) Inter@ctive Cloud (Dropbox) DLNA ROVI Smart TV Guide (Web EPG) Web Browser AppPip HBB TV 1.2.1 ( 1.5 ) HEVC YES (Tuner, Internet, USB) YES (Tuner, Internet, USB) Wi-di (other than Widi ready products) Live Share (Widi & Miracast) YES (RX only (Receiver)) YES (RX only (Receiver)) Interactive Hotel TV VoD - Maxdome/Netflix/ Amazon Prime* Online Software Update OSD Type Grundig/Beko/Arçelik/OEM Grundig/Beko/Arçelik/OEM Easy-to-Use User Interface Remote Control TS1 - TS2 - TS3 - TS4 TS3 - TS4 Easy-to-Use Remote Control OPTION OPTION W8, IPhone/IPad, Android remote control CI+ 1.3 (Double) CI+ 1.3 (Double) Dolby MS11 OPTION OPTION Dual Watch ENGLISH...
- Page 9 PRODUCT SPECIFICATIONS -------------------------------------------------------------- Zero boot Panel stand-by during music Capture & Share Gesture Control Voice Recognition Baby Watch Easy sign-in Easy Search Simple Hotel TV Front Time Display ENGLISH...
-
Page 10: Functional Specifications
PRODUCT SPECIFICATIONS -------------------------------------------------------------- Functional specifications In our country, DVB-T2 (Digital Terrestrial Broad- GF chassis project has been designed as a casting) has been tested by TRT in 3 metropoli- continuation of the existing KR/KP connected tan cities, but private broadcasting companies TV concept and it offers price benefits while have not started DVB-T broadcasting yet. DVB-C preserving the currently supported features. (Digital Cable Broadcasting) has been started It is planned to use 40", 49", 55" Eternity pan- over the cable TV network called "Teledünya". els and 40", 43", 49", 55" Crystal panels in the DVB-T broadcasting supports MPEG2 and project. MPEG4 standards. Our GF chassis products All applications in the current Grundig Smart support MPEG4 broadcasting. Apps market will be supported in the GF project as well. To summarize, our GF chassis products support the following features: GF chassis will be able to provide Miracast Features supported by KR/KP chassis. feature RX (one-sided). Thanks to Miracast RX feature it will be possible to transfer the picture Decryption of UHD, FHD and HEVC broad- on compatible devices (laptop, mobile phone, casts tablet, etc.) to the TV wirelessly. The picture on HEVC 60Hz support on all sources compatible devices can be transmitted to the TV Bluetooth features for compatible devices screen with the MHL feature as well. HBB TV DLNA DMP-DMR... - Page 11 Special features Under this topic, you can learn about the out- standing features that our GF chassis products incorporate and also descriptions of these features. SMART inter@ctive TV 4.0 internet ap- plications SMART Inter@ctive TV 4.0 interactive applica- tions provide your television with Internet ser- vices and pages. These applications have been designed in com- patibility with the television. With SMART Inter@ctive TV 4.0 feature you can run many local and global internet applications. Thanks to Grundig Application Store, you can find various applications that you may use on your Grundig TV. You can download various applications from Grundig Application Store. These applications include video, picture, music, social networking, news and sports applications, weather forecast applications and some specific applications. Arçelik TV Remote control mobile ap- plication Your TV supports remote control feature for Apple iPhone/iPad and Android phones. Depending on the features of your mobile device, you can control your TV through your mobile device by downloading ARCELİK TV Remote applica-...
- Page 12 PRODUCT SPECIFICATIONS -------------------------------------------------------------- DLNA (Home Network) SCR (Single Channel Router) Technology (Unicable) Digital Living Network Alli- ance (DLNA) is an asso- GF chassis products ciation established by the support SCR (Single leading companies of consumer electronics, Channel Router) mobile and Personal Computer industries. Its feature. objective is to ensure that all electronic devices The fact that the which are manufactured by different companies number of chan- and used in home networks are manufactured nels which can be within certain standards and comply with each received from satel- other. Thus users can benefit from their different lite is very high and brand devices in home network smoothly and therefore the band- without interruption. The alliance companies can width of the signals develop their products in line with these stan- is very wide makes dards or make desired changes. carrying these sig- You can easily access Video, music and image nals from the satellite dish to the house difficult.
- Page 13 PRODUCT SPECIFICATIONS -------------------------------------------------------------- be connected, and there is no need to make a and DVD player, STB or video recorder and modification in the hardware of the device. control such equipment with the remote control of the television. This feature must also be sup- USB Recording Feature (USB-PVR) ported by the device you will connect it. This feature allows you to record digital televi- sion channels (DVB–T/T2, DVB–C and DVB-S2) on an external USB disk and play these records Operating with Common Interface (CI+) on the disk at a later time. Recording programs Common Interface (CI) is only used in DVB to view them later can only be realized with dig- receivers. Scrambled channels can only be ital television stations. Recording and playing viewed with a CA module suitable for the en- programs, as well as time shift function can only coding system and the corresponding smart be available by using an external data medium card. The television set is equipped with a Com- (hard drive or USB stick). The data medium must mon Interface slot into which CA modules from have a capacity of 2 GB minimum. various providers can be inserted. The service It is possible to record a channel to USB-PVR or provider's smart card must be inserted into the to a hard disk simultaneously while watching CA module to enable the scrambled channels the other channel out of 2 channels at the same you want to view.
- Page 14 PRODUCT SPECIFICATIONS -------------------------------------------------------------- Full HD, User Friendly Menu Structure Web Browser (Open Web Browser) The user-friendly new UI structure provided with Open web browser software enables users KP chassis has been kept in the new GF chassis to open HTML or more advanced pages on as well. network providers. GF chassis incorporates a "Web Browser". Thus, as in computers or mobile The aims of this structure are; phones, all internet pages can be accessed by Impressiveness: To create a quality experience entering the URL address. Browser does not with animations and design, support Flash. For this reason, on some web Themeability: To create special designs for pages, applications requiring flash player will our brands and to create distinctiveness among not function. them, Accessibility: To create designs that can easily be used by everyone of all age groups as well Electronic TV Guide as offering ease of use in our all interfaces. The Electronic TV guide (RoviGuideTM) has two operation modes, namely online and offline.
-
Page 15: Package Content
PACKAGE CONTENT ----------------------------------------------------------------------------------- Standard accessories Optional accessories Television Easy-to-Use Remote Control Battery for Easy-to-Use Remote Control Stand Cleaning cloth Remote control Battery for remote control Screws and installation instructions for the stand User manual... -
Page 16: Connection/Preparation
PRODUCT INSTALLATION ------------------------------------------------------------------- Connection/Preparation Connecting the antenna and the power cable For digital satellite channels (DVB-S), Note: connect the satellite antenna cable to the When connecting an indoor antenna you SATELLITE MAIN antenna socket on the may have to try it out at different positions television set; until you get the best reception. 1b Two digital satellite signals (DVB-S) are 3 Plug the power cable into the wall socket. required to use PIP function and advanced Note: recording function for TV programs. Con- Only plug the device into the mains socket nect the second digital satellite signal from after you have connected the external the same switch or LNB to SATELLITE SUB devices and the antenna. antenna sockets. Do not use an adapter plug or an extension and /or cable which does not meet the applicable 2a For terrestrial digital stations (DVB-T), con- safety standards. Do not make changes on nect the rooftop or indoor antenna (passive the power cable. -
Page 17: Connections Of The Television
PRODUCT INSTALLATION ------------------------------------------------------------------- Connections of the television ERV CE SATELLITE ANT IN Optic Out USB3 HDMI3 HDMI4 13/18V max 500mA 5V max 50mA (ARC) (MA N) (SUB) -
Page 18: Control Elements On The Television
PRODUCT INSTALLATION ------------------------------------------------------------------- SCART / S-VHS / COMPONENT signal input (HDMI). S cart audio / video input HDMI2 H DMI socket, audio/video (CVBS signal, RGB signal); signal input (HDMI). S-Video audio / video Control elements on the televi- input (with Scart-S-VHS converter); sion Component, audio / video Power button, used to input (with Scart - YPbPr switch the TV to standby converter. mode and turn the TV off. SERVICE is for service purposes. Note: Optic Out Optics sound output. There must not be any obstacle around the power switch for you to access it easily. LAN N etwork cable connection socket. -
Page 19: Remote Control - Main Functions
PRODUCT INSTALLATION ------------------------------------------------------------------- Remote control - main functions Turns on/off the television Switches the television on set (stand-by). from standby mode; selects S witches between teletext channels directly. and TV modes. Selects the channel list (»ALL«, »FAV1« to »FAV4«). HbbTV functions help screen. Opens the electronic TV Exits menus and applications. guide Displays information. Zapping function switches the menus back one Opens the menu. menu level. Opens the channel list. Opens MyApps menu. Opens Tools menu. Signal source. Adjusts the volume. Switches the television on from standby mode; Turns audio on/off (mute). selects the stations step by step Record, playback, Previous, Next, pause or Forward, Backward;... -
Page 20: Settings
SETTINGS ------------------------------------------------------------------------------------------------------------------ The television is fitted with an "installation assis- There are various options when using WLAN: tant", which guides you step by step through the Auto connection, basic settings. The user can use the dialogue window on the a ll data regarding connection settings (»IP Ad- screen to perform settings that seem complex dress«, »Netmask«, »Gateway« and »DNS«) and data inputs in a simple way that will be are obtained from the modem automatically. understood by anybody. D epending on the router, you can use the fol- Pages and dialogue items appear on the screen, lowing options: which identify the subsequent and likely operat- – O ption "WPS-PBC" (Push Button Configura- ing steps. tion); To support this, you will also see the required – Connection with a WPS PIN; button symbols of the remote control. – C onnecting by entering the network pass- Detailed basic settings: word. – language selection – country selection; Manual connection, – user mode selection; a ll data regarding connection settings (»IP Ad- – network configuration (if required);... -
Page 21: Initial Set-Up
SETTINGS ------------------------------------------------------------------------------------------------------------------ Initial set-up – » Enhanced« – if you will use the televi- sion for a demo presentation, enhanced Switch the television set to standby using the picture and sound settings are used in this power switch O/I. mode. Enhanced mode consumes more Switch on the television in standby mode energy. with » «, »1…0«, »P+« or »P–«. Select »Stand« or »Wall-mounted« with » « – T he Menu Language selection menu ap- or » «. Λ pears when the television is switched on Note: for the first time. C hoosing the location of the television is important for automatic sound setting. Smart Inter@ctive 4 0 Press »OK« to confirm »Next«. – » Summary« menu will be displayed. Please select your desired menu language Menu Language Press »... - Page 22 SETTINGS ------------------------------------------------------------------------------------------------------------------ Connecting to the home network with a Select the network that you want to con- nect with » « or » « and press »OK« to LAN cable Λ confirm. Select »Wired« with » « or » « and Λ – W ireless connection password screen will confirm with »OK«. be displayed. Select »Connect« with » « (Red) to establish < > Select the required character with » «, » «, modem connection. » « or » « and move to the next charac- Λ – » Connecting ... Please wait« message ter with »OK«.
- Page 23 SETTINGS ------------------------------------------------------------------------------------------------------------------ Searching television channels with sat- Tuning digital cable television channels ellite signal (DVB-S/S2) (DVB-C) Select »Satellite« with » « or » « and Select »Cable« with » « or » « and Λ Λ confirm with »OK«. confirm with »OK«. – T ürksat Satellite is preset to 42 ° East. Select »Scan Type« with » « or » «. Λ < > Select »Standard Mode« with » « or » « Select »Quick« or »Full« with » « or » «.
- Page 24 SETTINGS ------------------------------------------------------------------------------------------------------------------ Tuning terrestrial digital television channels (DVB-T/T2) Select »Air« (Antenna) with » « or » « Λ and confirm with »OK«. Important: Air (antenna) power supply (5V ) may only be switched on if the antenna is an active indoor antenna with a signal amplifier and is not already supplied with a voltage via a mains plug (or similar supply). Otherwise you may cause a short circuit and irreparably damage your antenna. Select »Active Antenna Power« with » « or » Λ« Switch on the antenna power supply for the < > antenna with » « or » « (»On«). Select »Next Page« with » « or » « and Λ press »OK« to confirm. Note: < > S elect Channel Type. Press »...
-
Page 25: Picture / Sound Settings
PICTURE / SOUND SETTINGS --------------------------------------------------------- Picture settings Enhanced picture settings "Enhanced picture settings" are found in primary Open the menu with »MENU«. digital picture. However, these should only be < > Select »Settings« with » «, » «, » « or used when necessary when the picture quality » and confirm with »OK«. Λ and transmission are excellent. They may well improve the display with poor material, but may Confirm the menu item »Picture« with » «. adversely affect the display where transmission – »Picture« menu is now activated. and picture quality are excellent. Settings > Picture »Vibrant Colour« – Increases the color XX XXX XXXX contrast and the contrast adjustment. This setting is mostly too strong for use with nor- P cture Broadcast Network... - Page 26 PICTURE / SOUND SETTINGS --------------------------------------------------------- »Sharpness« – Reduces the visible "snowy" Restore Factory Defaults areas by displaying the picture a little more In »Picture« menu, select »Restore Default sharply and creating a slight blurring. It Display Settings« with » « and press »OK« should therefore be used minimally provid- to confirm. ed that a good picture material is present. Press »Yes« to confirm the security query; »Noise Reduction« – Reduces the visible "snowy" areas by displaying the picture a little more sharply and creating a slight blur- select »No« and press »OK« to cancel. ring. It should therefore be used minimally Press »EXIT« to finish the setting. provided that a good picture material is present. Ending the settings »Block Noise Reduction« – This function Press »EXIT« to end the setting and quit the can only be selected with digital receiver menu. sources and AV pre-sets. It reduces any in- terference from artefacts (pixel blocks) from digital programs due to MPEG compression (such as from DVB-T receivers and lower transmission rates or DVD players).
-
Page 27: Sound Settings
PICTURE / SOUND SETTINGS --------------------------------------------------------- Sound settings Night Mode Night Mode prevents sound fluctuations and Open the menu with »MENU«. volume increases. < > Select »Settings« with » «, » «, » « or Select »Night Mode« with » « or » «. Λ » and confirm with »OK«. Λ Activate (»On«) or deactivate the night > Select the menu item »Sound« with » « or < > mode by pressing » « or » «. < » « and press » « to confirm. Notes: – »Sound« menu is now activated. »Night Mode« will be active in the menu is »DTS« is selected in »Sound Mode«. - Page 28 PICTURE / SOUND SETTINGS --------------------------------------------------------- Note: Auto volume For pairing, select »Select Bluetooth Device« Television channels broadcast at different vol- with » « or » « and press »OK« to con- umes. Automatic Volume Limiting (AVL) function Λ firm. Save the subwoofer with » « (red). enables the volume to be kept the same when you switch between channels. Press »EXIT« to finish the setting. Select »Advanced« with » « or » « in the Λ Sound menu and press »OK« to confirm. TV location Choosing the location of the television with this Select »AVL« with » « or » « and then Λ < > feature is important for the automatic sound select »On« with » « or » «. setting. Note: Select »Advanced« with »...
-
Page 29: Electronic Tv Guide
ELECTRONIC TV GUIDE --------------------------------------------------------------------------- The Electronic TV guide (RoviGuideTM) has two Select the channel with » « or » «. Λ operation modes, namely online and offline. – I nformation about the actual program will be displayed in the selected television In the offline mode, you can only see channel channel. data which the station provider has made available. Note: Press »P+« or »P-« to skip 5 channels each A lot of content can be received via the Internet time. connection in the online mode such as, program information, channel logos, information about Switch to the information section about the players, pictures, fragments, etc. current program using »OK«. Notes: Logging on to "RoviGuide™" T o display a small image of the program, When opening the channel guide for the first > select »Watch« with » « and confirm with time, you must accept Terms and Conditions »OK«. so that you can fully access the customized T he selected program can be stored (if an functionality of the TV guide. -
Page 30: Electronic Tv Guide In Online Mode
ELECTRONIC TV GUIDE --------------------------------------------------------------------------- The Electronic TV guide in online "Search" search parameter mode Select »Search« with » « or » « and Λ press »OK« to confirm. In the online mode, two other search criteria are – An entry field will appear. available as well as a range of information. Select the first character/digit of the You can search for different topics using required search item with » « or » « and »Browse«. Λ press »OK« to move to the next position. Use the »Search« function to enter a search item – T he search results for the first character/ and suggestions will appear on the right side of digit will be displayed on the screen. the screen. Note: Select the other characters/digits of the required search item with » « or »... -
Page 31: Connecting External Data Medium
USB RECORDING ------------------------------------------------------------------------------------------- Connecting external data me- Notes: dium USB3 port of the TV supports 500 mA current according to the USB standard. Notes: Devices that consume more power such as It is advised to switch the television to stand- external hard disks can only be connected by mode before connecting the External to the USB1 and USB2 interface of the Data medium. television. Before disconnecting the external data If you are using a power cable for the ex- medium, first of all, the television must be ternal hard disk that you have connected to switched to standby mode. Otherwise, may the »USB1« and »USB2« USB interface, can be damaged. then the power cable of the external hard There are three USB inputs on the television, disk must also be unplugged when the TV is namely »USB1«, »USB2« and »USB 3«. turned off. USB1 and USB2 inputs are intended for You must not disconnect the USB Device USB devices that require additional power from the TV while a file on the USB Device (e.g. external hard disk). is being read by the TV. Plug the external hard disk to USB1 or USB2 interface of the television;... -
Page 32: Usb Recording Settings
USB RECORDING ------------------------------------------------------------------------------------------- USB recording settings Selecting external data medium If there are more than one external data medium Selecting the menu connected to the television, select one of them. Open the menu with »MENU«. In the »Disk Management« menu select < »Disk« with » « or » « and press »OK« Λ Select »Records« with » «, » «, » « or Λ > to confirm. » « and confirm with »OK«. – » Media Player« menu will be displayed. Select the external data medium with » « or » « and press »OK« to confirm. Λ Select »PVR« with » « or »... -
Page 33: 33 "Pausing" Time Shift Programs
USB RECORDING ------------------------------------------------------------------------------------------- Formatting the partition "Pausing" time shift programs In the »Disk Management« menu, select You can pause a program that you are watch- »Format Partition« with » « or » « and Λ ing. This is a useful function. For instance, if the press »OK« to confirm. phone rings when you are watching a movie, < > you can pause the movie and resume it after the Select »Yes« with » « or » « to confirm the call without missing anything. deleting process; The freeze-frame image of the last scene will be displayed on the screen and the time shift will select »No« and press »OK« to cancel. be stored in the external data medium. 3 Return with »BACK < « or press »EXIT« to In the Time shift mode, you can only record as end the setting. much as the free memory in the external data medium. Switching to continuous recording You can record 60 minutes maximum in the cur- When the permanent recording option is set to rent broadcast. -
Page 34: 34 "Pausing" Time Shift Programs
USB RECORDING ------------------------------------------------------------------------------------------- Formatting the partition "Pausing" time shift programs In the »Disk Management« menu, select You can pause a program that you are watch- »Format Partition« with » « or » « and Λ ing. This is a useful function. For instance, if the press »OK« to confirm. phone rings when you are watching a movie, < > you can pause the movie and resume it after the Select »Yes« with » « or » « to confirm the call without missing anything. deleting process; The freeze-frame image of the last scene will be displayed on the screen and the time shift will select »No« and press »OK« to cancel. be stored in the external data medium. 3 Return with »BACK < « or press »EXIT« to In the Time shift mode, you can only record as end the setting. much as the free memory in the external data medium. Switching to permanent timeshift You can record 60 minutes maximum in the cur- When the permanent recording option is set to rent broadcast. -
Page 35: Usb Operation
USB OPERATION -------------------------------------------------------------------------------------------- Recording Programs Recording a program from the channel list You can record a TV channel while watching Press »OK« to open the channel list. another TV channel at the same time. Data for < > these programs are stored in the external data Select a channel with » « or » « and press medium and the archive is managed via the »OK« to confirm. television. Press »EXIT« to exit the channel list. You can record digital terrestrial (DVB-T), digital Press » « to start recording. cable (DVB-C) and digital satellite (DVB-S) chan- – R ecording information will be displayed: nels and watch a different TV channel at the Recording symbol, channel name, pro- same time. gram time and recording time. Note: – T hese information will disappear after a If you want to watch a different TV program short while. Recording symbol and the while recording digital satellite (DVB-S) -
Page 36: Program Setting For Recording
USB OPERATION -------------------------------------------------------------------------------------------- Program setting for recording Note specific to UPC customers: While the program is being recorded, part of the previ- ous or the next program may be included in ... with electronic program guide the recording because of Programme Guide Electronic program guide data can be used for errors. In such cases, keep in mind that the recording. highest family protection level will apply to A total of 25 EPG reminders and/or recorders the whole recording if one or more of those can be set in total. programs has/have family protection. Press »GUIDE« to open the electronic program guide (EPG). Setting the delay/follow-up time You can change the recording time set with the Select the desired channel with » « or electronic TV guide with this function. » «. Λ – I nformation about the actual TV program If you think that a program will start a few min- will be displayed. -
Page 37: Editing The Timer
USB OPERATION -------------------------------------------------------------------------------------------- ... by entering the information manu- Editing the timer ally You can edit programmed timers. 25 TV programs can be preset for timer record- Open the menu with »MENU«. ing or for the reminder. < Select »Schedule List« with » «, » «, » « Λ Press »GUIDE« to open the electronic > or » « and confirm with »OK«. program guide (EPG). – T he »Schedule List« will be displayed. < Press button successively. Menu will be Press » « or » « to select the program Λ displayed on the left side of the screen. title to be edited and press » « (green) to ... -
Page 38: Playback
USB OPERATION -------------------------------------------------------------------------------------------- Playback Playback during a recording You can either watch the current programme Recorded programs (started either manually or that is being recorded or a previously recorded using the timer function) are all stored in the ex- program while recording takes place. ternal data medium. You can display an archive 1 Select the channel with »1…0« or »P+«, in the external data medium from the »Media Player« menu. »P–« and press » « to start recording. Press » « (red) button to display PVR Selecting a broadcast from the record- content. ed files list Press » « or » « to select the program Λ Open the menu with »MENU«. you want to watch and press » « to start <... -
Page 39: File Formats
USB OPERATION -------------------------------------------------------------------------------------------- File formats Audio data Your television can play audio data coded with Your television can be operated via the USB MP3, AAC standards. input with the following file formats: MP3 stands for MPEG-1 Audio Level 3 and is based on the MPEG-1 standard developed by Video data MPEG (Motion Picture Expert Group). Video compression / decompression (codec) is AAC indicates the Advanced Audio Coding and intended for decreasing the storage area with- has been developed by MPEG. AAC provides out sacrificing the picture quality. higher audio quality with the same data rate (bit Your TV allows you to play compressed video rate). data with XVID, H.264/MPEG-4 AVC(L4.1, Ref. WMA (Windows Media Audio) is a compres- Frames:4), MPEG-4, MPEG-2, MPEG-1, MJPEG, sion standard developed by Microsoft for audio MOV standards. data. File extensions supported by the device: ".avi", These formats enable audio files to be saved on "mkv", ".mp4", ".ts", ".mov", ".mpg", ".dat", storage devices with a sound quality similar to ".vob", ".divx". In addition to video data, these that of a CD. files also contain audio data compressed and File extensions supported by your device: "packaged" by using MP3, AAC or Dolby Digi- ".mp3", ".mp2", ".wma", ".m4a", ".aac", ".wav" tal. -
Page 40: Connecting External Data Medium
USB OPERATION -------------------------------------------------------------------------------------------- Connecting external data me- dium It is advised to switch the television to stand-by mode before connecting the External Data me- dium. Connect the device and then switch the television on again. Before disconnecting the data medium, first of all, the television must be switched to standby, otherwise files may get damaged. Notes: »USB3« port of the TV supports 500 mA current according to USB standard. Devices that consume more power such as external hard disks can only be connected to the »USB1« and »USB2« interface of the television. Connect the »USB1« and »USB2« USB To get higher efficiency from your external interface of the television and the corre- devices supporting USB 3.0, it is recom- sponding data output socket on the external mended to connect them to »USB1« data device (external hard drive, digital interface of the TV. camera, card reader or MP3 player) using a USB cable; If you are using a power cable for the external hard disk that you have connected to the »USB1« and »USB2« USB interface, plug the memory stick into the »USB3« then the power cable of the external hard interface of the television. disk must also be unplugged when the TV is turned off. Removing the external data medium You must not disconnect the USB Device Disconnect the data medium be-... -
Page 41: File Browser
USB OPERATION -------------------------------------------------------------------------------------------- File browser Settings in the USB set-up menu The file browser displays the video, audio and Selecting the menu picture data that the external data medium Open the menu with »MENU«. provides. Select »Media Center« with » «, » «, If a data medium contains different file formats, Λ < > » « or » « and confirm with »OK«. you can deactivate data (Video file, Audio file, Picture file) you do not need for the playback Select the external data medium with » « using a filter function. or » « and press »OK« to confirm. Λ Select »Media Options« with »TOOLS«. The main menu of the file browser Select »Disk Management« with »... -
Page 42: Vλ
USB OPERATION -------------------------------------------------------------------------------------------- Selecting the display duration of the Play basic functions slide show Open the menu with »MENU«. Select »Slide Show Interval« with » « or Select »Media Center« with » «, » «, Λ » «. Λ < > » « or » « and confirm with »OK«. < Select the time (3, 5, 10 seconds) with » « – » Media Player« menu will be displayed. > or » «. Select the external data medium with » « Press »EXIT« to finish the setting. - Page 43 USB OPERATION -------------------------------------------------------------------------------------------- Additional playing functions Notes: It is possible that some files that are sup- Depending on the file formats used, the follow- ported in USB mode do not operate due to ing additional functions are possible. some problems that may arise depending on how such files are created (compression) Selecting chapters in files although they contain the supported file (only supported video files) extension. During playing, select the next chapter with If there are more than one audio sources > » «. (audio stream) in the video files that are During playing, select the previous chapter being played, then you can switch between < with » «. the audio sources with the » « while the file is being played in full screen mode. Selecting titles in files Films you will be watching from the film (only supported video files) file only supports subtitles with .srt, .sub, .ass, .ssa, .smi format. Names of the subtitle During playing, select the next title with...
-
Page 44: And Confirm With "Ok
USB OPERATION -------------------------------------------------------------------------------------------- Moving to desired time in video files Repeat functions Press »OK« during playing. – » One«, the selected track is repeated once; Enter the time that you want to move to with – » Sequence«, selected tracks are repeated »1...0« and confirm with »OK«. consecutively; – » Random«, selected tracks are repeated Moving to desired time in audio files in a mixed order; Press » « (yellow) button during play- – » None«, repetition off. back. -
Page 45: Smart Inter@Ctive Tv 4.0
USB keyboard and mouse music, social networking applications, news and You can connect a keyboard or mouse to both sports applications, weather forecast applica- sockets USB1, USB2 or socket USB3 to use in tions and some specific applications. the Web browser. Keyboards and mice requir- Notes: ing special drivers are not supported. Availability of SMART Inter@ctive TV 4.0+, inter@ctive applications may vary from one Introduction to Smart Inter@ctive country to the other. For applications other than the ones in Open the menu with »MENU«. Grundig Smart Apps, SMART Inter@ctive < TV 4.0+ cannot download and save files, Select »Application Center« with » « or > cannot upload files to a web site or cannot » « and press »OK« to confirm. install add-ins except Login pages of some – » Inter@ctive Applications« menu will be applications. displayed. During initial login, general terms and conditions for users will be Grundig, under no circumstances, shall be displayed. -
Page 46: Press
SMART INTER@CTIVE TV 4.0+ -------------------------------------------------------- Selecting internet applications Displaying all applications Press »@« to open »My Apps« menu. Applications displayed on SMART inter@ctive – S MART inter@ctive TV 4.0+ home page TV 4.0+ home page are just a few of the ap- will be displayed. plications that can run on the television. You can display and select other applications in »All Applications«. SMART Inter@ctive TV 4 0+ Press »@« to open »My Apps« menu. Enter he Sea ch Key All app ica ions Featured Select »All Applications« with » «, » «, Λ... -
Page 47: Smart Inter@Ctive Tv 4.0+ Home Page
SMART INTER@CTIVE TV 4.0+ -------------------------------------------------------- Smart Inter@ctive TV 4.0+ home page Applications. SMART Inter@ctive TV 4.0+ All Applications. Enter the Search Key All applications Search bar. Featured Exit. Most Popular New Applications Navigation Select Exit Settings Legal notice Navigating in the main menu Press »OK« to confirm the selections in virtual keyboard and applications. -
Page 48: Smart Inter@Ctive Tv 4.0 Browser Main Menu
SMART INTER@CTIVE TV 4.0+ -------------------------------------------------------- Uninstalling internet applications Fav« option and confirm with »OK«. < > – » ★« will be marked and the application Use » «, » «, » « or » « to select the Λ will be added to favorites. application that you want to uninstall. Press » « (green) to activate the tools < > Sorting internet applications menu, use » « or » « to select »Uninstall« option and confirm with »OK«. You can change the order of the applications – A warning message is displayed. according to your preference. Under »My Apps« menu, press » « (red) Confirm »Uninstall« option with »OK«. ... -
Page 49: Web Browser Menu
WEB BROWSER ------------------------------------------------------------------------------------------------- Web browser menu 11 12 http://www grundig de grundig.com Navigation Operation Menu Zoom Out Zoom In Page Down Tool Bar Menu controls. Web browser application Active tab. Web browser allows you to navigate the Inter- net. Previous page. Open the menu with »MENU«. Next page. < Select »Web Browser« with » «, » «, » « Λ Refresh. -
Page 50: Using An External Device
USING AN EXTERNAL DEVICE ------------------------------------------------------- DIGI LINK Switching off the external device from standby mode Your television is equipped After switching your television to standby, your with DIGI LINK feature. This external device (e.g. DVD player) will also feature utilizes CEC (Consumer switch to standby if it is switched on. Electronics Control) protocol. DIGI LINK is always active on your television. CEC allows you to make an Refer to the user manual of your external device HDMI connection between your TV and DVD to learn how to activate this feature on it. player, STB or video recorder and control such equipment with the remote control of the televi- Searching and selecting the active ex- sion. This feature must also be supported by the ternal device device you will connect it. You can connect up to 11 devices that support You television supports the following functions. -
Page 51: Device Control
USING EXTERNAL DEVICES --------------------------------------------------------------- Device Control Switching the device to standby This option switches the connected external You can determine how the remote control of device to standby. your television will control the external device. < > Press » « and use « or » « to select < > Press » « and use « or » « to select either one from »HDMI1« to »HDMI4« and either one from »HDMI1« to »HDMI4« and then confirm with »OK«. then confirm with »OK«. Open the menu with »MENU«. Open the menu with »MENU«. < > Use » «, » «, » « or » « to select »Set- <... -
Page 52: High Resolution - Hd Ready
USING EXTERNAL DEVICES --------------------------------------------------------------- High resolution – HD Ready external devices to depends/depend on the sockets the external device is equipped with Your television can and the signals available. play high-definition Note that with many external devices television signals the resolution of the video signal must be (HDTV). adapted to the input sockets on the televi- You can connect the sion (check the external device’s instruction input sources (HDTV manual). You can find out which values you set-top box or High need to set by referring to the guidelines in Definition DVD player) to the »HDMI« socket the section about connection options. (digital HDTV signal). Do not connect any other device while This ensures that you can view digital HDTV pro- the device is switched on. Switch off other grams, even if they are copy-protected (HDCP devices as well before connecting it. High Bandwidth Digital Content Protection). Only plug the device into the mains socket Connection options after you have connected the external device. The television socket(s) you connect your S RV CE SATELLITE ANT IN... -
Page 53: Connecting An External Device
USING EXTERNAL DEVICES --------------------------------------------------------------- Connecting an external device With an analog video signal (progres- sive) With a digital audio/video signal Suitable devices: DVD player/recorder, Suitable devices: Digital satellite receiver, games console. game console, BluRay player, DVD player/ Video signal: YUV; definition: standard 576p; recorder, set-top box, notebook, PC. HDTV 720p, 1080i, 1080p. Video signal: digital image; definition: stan- Audio signal: stereo, analog. dard 576p; HDTV 720p, 1080i, 1080p. Channel position »Component«. Audio signal: digital sound (stereo, multichan- Connect SCART / S-VHS / COMPO- nel compression, uncompressed). NENT sockets on the television to the cor- »HDMI1«, »HDMI2«, »HDMI3«, »HDMI4« responding sockets on the external device channel position. -
Page 54: Using A Dvd Recorder, Dvd Player, Video Recorder Or Set-Top Box
USING EXTERNAL DEVICES --------------------------------------------------------------- Selecting Scart volume adjustment Using a DVD recorder, DVD play- Open the menu with »MENU«. er, video recorder or set-top box < > Use » «, » «, » « or » « to select »Set- Λ Switch on the video recorder, DVD player tings« and confirm with »OK«. or set-top box and select the function you wish to use. > Select the menu item »Sound« with » « or < < > » « and press »... -
Page 55: Hi-Fi System
USING EXTERNAL DEVICES --------------------------------------------------------------- Hi-fi system Open the menu with »MENU«. < > Use » «, » «, » « or » « to select »Set- Λ Connecting digital multi-channel ampli- tings« and confirm with »OK«. fier/AV receiver > Select the menu item »Sound« with » « or Connect the HDMI4 (ARC) (HDMI 1.4 < » « and press » « to confirm. Audio Return Channel) socket to the relevant – » Sound« menu will be displayed. socket on the HDMI ARC compliant Digital Select »Advanced« with » « or » « and multichannel amplifier / AV receiver with a Λ... -
Page 56: Playing Audio Signal With The Hi-Fi System
USING EXTERNAL DEVICES --------------------------------------------------------------- Playing the audio signal with the Hi-Fi system Connect the socket on the television and the corresponding socket on the Hi-Fi system / AV receiver using an adapter cable. Note: When this function is activated, the Hi-Fi system / AV receiver (connected to socket ) transmits the audio signal. Open the menu with »MENU«. < > Use » «, » «, » « or » « to select »Set- Λ tings« and confirm with »OK«. > Select the menu item »Sound« with » « or < » « and press » « to confirm. – » Sound« menu will be displayed. Press »... -
Page 57: Wired Screen Share (Mhl)
WIRED SCREEN SHARE (MHL) -------------------------------------------------------- What is MHL? Your television supports MHL connection (Mo- bile High Definition Connection) thanks to an MHL cable or MHL adapter. MHL connection allows you to share your mobile device screen with the television by connecting your mobile device to the televi- sion by means of an MHL cable. MHL can only be used through HDMI1 (MHL) socket on your TV and only with a mobile device that supports MHL feature. Connecting a mobile device Connect HDMI1 (MHL) socket on your television with the corresponding socket of the mobile device by using an MHL cable or an HDMI adapter. Selecting the channel position for a mobile device < > Press » « and use » « or » « to select input signal »HDMI1«, then confirm with »OK«. -
Page 58: Wireless Screen Share (Liveshare)
WIRELESS SCREEN SHARE (LIVESHARE) --------------------------- What is LIVESHARE? Note: To find out if your laptop or mobile device Liveshare is a wireless technology featured supports Liveshare feature or not, please with an Android operating system and used to visit the website of the manufacturer. reflect the screen of your mobile device -which supports this feature- to your television support- ing Liveshare. Using this technology, you can share your device's content, present a slide show or play your favorite game on a larger screen. Screen share with Liveshare con- nection Open the menu with »MENU«. < Select »Screen Share« with » «, » «, » « Λ > or » « and confirm with »OK«. – » Liveshare« menu will be displayed. Start Liveshare application from your laptop or mobile device and select your television. -
Page 59: Operation With Common Interface
OPERATION WITH COMMON INTERFACE --------------------- What is common interface? Access control for the CA module and smart cards Common Interface (CI) is an interface for DVB receivers. Open the menu with »MENU«. S crambled stations can only be viewed with a < > Use » «, » «, » « or » « to select »Set- Λ CA module suitable for the encoding system tings« and confirm with »OK«. and the corresponding smart card. > < Select »Source« with » « or » « and press The television set is equipped with a Common »... -
Page 60: Network Setup
NETWORK SETUP ------------------------------------------------------------------------------------------- To use "SMART inter@ctive TV 4.0+" and "Op- Wired network eration with Digital Media Server" functions, you must connect the television to your home Wired network connection network with internet access and log on. Connect the output of the external modem S MART inter@ctive TV 4.0+ is a depot where to LAN socket with Cat 5 cable. you can find various applications that you may use on your Grundig TV. These applications include video, picture, music, social network- ing applications, news and sports applications, weather forecast applications and some specific applications. Your TV supports the remote control feature for Apple iPhones and Android phones. Depending on the features of your phone, you can control your TV via your phone after downloading the free »GRUNDIG TV Remote« application from Apple App Store or Google Play (Android Market). Network connection You can establish a wired or wireless connection between your television and the local network. Note: If you want to use a wired network connection, Connection cables are not provide with the please start with the instructions provided on this product. page: If you use a wireless network connection, please follow the instructions in the "Wireless network... - Page 61 NETWORK SETUP ------------------------------------------------------------------------------------------- Wired network configuration Select »Network Configuration« with » « < > or » « and select »Auto« with » « or » «. Λ There are two ways to perform wired network Press » « (red) to select »Connect« option to configuration. establish the modem connection. A Auto connection, – » Connecting ... Please wait« message a ll data regarding connection settings (»IP will be displayed, and if the connection Address«, »Netmask«, »Gateway« and is established »Connection To Gateway: »DNS«) are obtained from the modem Success« message will be displayed. automatically. Press » « (green) to make sure that the B Manual connection, settings have been made and the local a ll data regarding connection settings (»IP network and internet connection have been Address«, »Netmask«, »Gateway« and...
- Page 62 NETWORK SETUP ------------------------------------------------------------------------------------------- Manual connection Press » « (red) to select »Connect« option to establish the modem connection. Certain networks require a Static IP address. If – » Connecting ... Please wait« message will your network requires a Static IP Address, you be displayed, and if the connection is suc- must enter »IP Address«, »Netmask«, »Gate- cessful, Connection to Gateway: Success« way« and »DNS« values manually. You can message will be displayed. get »IP Address«, »Netmask«, »Gateway« and »DNS« values (ISS) from your Internet Service Press » « (green) to make sure that the Provider. settings have been made and the local Open the menu with »MENU«. network and internet connection have been established. < > Use » «, » «, » « or » « to select »Set- Λ – » Testing ... Please wait« message will tings« and confirm with »OK«.
-
Page 63: Wireless Network
NETWORK SETUP ------------------------------------------------------------------------------------------- Wireless network Placing the modem or wireless network sharer on an elevated location will increase the wireless connection reception strength. Wireless network connection Wireless connection reception strength may vary depending on the type of the modem and the distance between the modem and television. Wireless network configuration You have several ways to connect your TV to your home network. A Auto connection, a ll data regarding connection settings (»IP Address«, »Netmask«, »Gateway« and »DNS«) are obtained from the modem automatically. D epending on the router, you can use the following options: – O ption "WPS-PBC" (Push Button Configu- ration); Television is equipped with a built-in Wire- – Connection with a WPS PIN; less WiFi Adapter to connect to wireless – C onnecting by entering the network pass- networks. - Page 64 NETWORK SETUP ------------------------------------------------------------------------------------------- Technical requirements Push the WPS button on your router. Most home networks are Dynamic Networks. To continue after pressing the WPS button If you have a dynamic network, you must use a < > on the access point, press » « or » « to DSL modem that supports DHCP. Modems and select »Continue« and confirm with »OK«. IP servers that support DHCP obtain the »DNS« – T he message "Connection to Gateway: values required for »IP Address«, »Netmask«, Success" will be displayed. »Gateway« and internet access automatically, Press » « (green) to make sure that the thus you are not required to enter those values network connection has been established manually. with the settings made. – » Testing ... Please wait« message will Wireless WPS network connection by be displayed, and if the connection is pressing a button established »Connection To Gateway: Open the menu with »MENU«.
- Page 65 NETWORK SETUP ------------------------------------------------------------------------------------------- Auto connection by inputting the net- Press » « (red) to select »Connect« option to establish the modem connection. work password – » Push the WPS button on your Access If your router does not support "WPS-PBC” or Point« message will be displayed. WPS PIN input, use this method to connect. Select »Select Access Point« with » « or Open the menu with »MENU«. » « and press »OK« to confirm. Λ Confirm »Settings« with »OK«. – W PS-supported wireless networks avail- > < Press » « or » « to select »Network Con- able will be scanned to be displayed in figuration« and confirm with »OK«. the »Select Access Point« menu. – » Network configuration« menu will be Select the network that you want to connect displayed.
- Page 66 NETWORK SETUP ------------------------------------------------------------------------------------------- Select the required character with » «, Manual connection < > » «, » « or » « and move to the next Λ Certain networks require a Static IP address. If character with »OK«. your network requires a Static IP Address, you – U sing »Shift« ➡ »OK«, you can switch must enter »IP Address«, »Netmask«, »Gate- between uppercase letters/numbers and way« and »DNS« values manually. You can lowercase letters/special characters. get »IP Address«, »Netmask«, »Gateway« and – S elect »Del« to delete the character »DNS« values (ISS) from your Internet Service entered and press »OK« to confirm. Provider. Confirm the password with » « (green). Open the menu with »MENU«. – » Connecting ... Please wait« message < > Use »...
-
Page 67: Changing The Tv Name
NETWORK SETUP ------------------------------------------------------------------------------------------- Select »Netmask« with » «. Changing the TV Name Enter Netmask address with »1…0«. The name "Inter@ctive TV" is assigned at the Select »Gateway« with » «. factory to ensure that your TV can be identified Enter Gateway address with »1…0«. in the network. You can change this name. Open the menu with »MENU«. Select »Select Access Point« with » « or » « and press »OK« to confirm. Λ < > Use » «, » «, » « or » « to select »Set- Λ – W ireless networks available will be tings« and confirm with »OK«. scanned to be displayed in the »Select < > Select »TV« with » « or » « and press Access Point« menu. -
Page 68: Searching For All Satellite-Connected Digi- Tal Television Stations Automatically
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Searching for all satellite-con- » « and press »OK« to select and mark Λ or unmark the »Free« and/or »Scrambled« nected digital television stations elements. automatically Press » « (Red) to start scanning. New satellite channels are added or satellite data are changed frequently. Therefore, we Notes: recommend you to run auto search function from W hen updating via the same satellites a time to time. security query is displayed at the beginning of the search. All transponders are scanned for new channels. T o store them in the previously stored chan- Open the menu with »MENU«. < > nels list, select »Yes« with » « or » «; < >... -
Page 69: Antenna Settings For Digital Satellite Chan- Nels And Searching For Channels Automati- Cally
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Use » « or » « to select the necessary Antenna settings for digital sat- Λ elements. ellite channels and searching for Service Type channels automatically < > Press » « or » « to select whether you Notes: want to search for only television channels (DTV), only radio channels (Radio) or both The following description about LNB set- (Radio+TV). tings provides substantial information about satellite systems. Consult your specialist Scan Type dealer. < > Press »... -
Page 70: Antenna Settings For Digital Sat- Ellite Channels And Searching For Channels Automatically With Scr System
> Press »OK« and use » «, » «, » « or press »OK« to confirm. » « to pick the satellite you wish to get – T he »Digital Search« menu will appear Λ and the search for TV channels will begin. the digital stations from and press »OK« to – T he search is complete as soon as confirm. »Search is completed!« appears. Type Note: If your antenna system incorporates a single cable router multi-switch, use »Grundig The search can be terminated with »EXIT«. SCR« option. Press »OK« or select »Grundig Press » « (yellow) to switch to the Chan- < > SCR« with » « or » «. nel Editor; Select »LNB-Frequency High« with » « and enter the frequency with »1...0« as a five-digit number. Press »EXIT« to end the setting. Select »LNB-Frequency Low« with »... - Page 71 DETAILED CHANNEL SETTINGS ---------------------------------------------------- two LNBs are used, select the required op- tion (»1/2« or »2/2«). User Band < > Using » « or » «, select the antenna socket used. UB Frequency (MHz) Using »1...0«, enter the required frequency for the selected antenna socket. Notes: Use installation equipment supported / sug- gested by your SCR Switch. Other users / receivers connected to the system may be affected if the specified user band number and frequency is changed during installation. User band and User band frequency is specified on the SCR switch used; and each user / receiver must select a specified user band and user band frequency. With SCR satellite system, auto search by several users / receivers at the same time may cause problems. Press » « (blue) to exit antenna settings. Select the Channel Type. Press » « or » « to select whether you Λ...
- Page 72 NETWORK SETUP ------------------------------------------------------------------------------------------- Connecting the TV to a "hidden" Confirm the setting with » « (red). – T he network is now in the »Select Access network Point« menu. Even if the SSID (Service Set Identifier) of the Select the network with » « or » « and Λ router is not visible, you can connect your TV to press »OK« to confirm. this network. – W ireless connection password screen will Open the menu with »MENU«. be displayed. < > Use » «, » «, » « or » « to select »Set- Λ Select the required character with » «, tings« and confirm with »OK«. <...
- Page 73 DETAILED CHANNEL SETTINGS ---------------------------------------------------- Searching for all satellite-con- Select Scan Mode. To select whether you want to scan free digi- nected digital television stations tal television channels (Free), only encrypt- automatically ed digital television channels (Scrambled) New satellite channels are added or satellite or both (Free + Scrambled), press » « or data are changed frequently. Therefore, we » « and press »OK« to select and mark Λ recommend you to run auto search function from or unmark the »Free« and/or »Scrambled« time to time. elements. All transponders are scanned for new channels. Press » « (Red) to start scanning. Open the menu with »MENU«. Notes: < > Use » «, » «, » « or » « to select »Set- Λ...
- Page 74 DETAILED CHANNEL SETTINGS ---------------------------------------------------- Searching for satellite-connected Network Search Select the network search as »On« or »Off« digital television channels manu- < > with » «or » «. ally Press » « (Red) to start searching. If a certain channel cannot be found through – T he »Digital Search« menu will appear auto search, you can search it manually by and the search for TV channels will begin. means of the manual search function. You must enter all parameters of the channel correctly. Note: You can obtain the current transponder informa- The search can be terminated with »EXIT«. tion from teletext page, satellite TV magazines Press »EXIT« to finish the setting. or internet. Open the menu with »MENU«. < > Use »...
- Page 75 DETAILED CHANNEL SETTINGS ---------------------------------------------------- Antenna settings for digital sat- LNB selection Select only the required »DiSEqC 1.0« or ellite channels and searching for »DiSEqC 1.1« option. channels automatically Press » « (blue) to exit antenna settings. Notes: Select the Channel Type. The following description about LNB set- Press » « or » « to select whether you Λ tings provides substantial information about want to search for only digital channels satellite systems. Consult your specialist (Digital) or only radio channels (Radio) or dealer. both (Digital + Radio) and press »OK« to Open the menu with »MENU«. select and mark or unmark the »Digital« < > Use »...
- Page 76 User band and User band frequency is Select the required elements with » «, specified on the SCR switch used; and each » «. Λ user / receiver must select a specified user band and user band frequency. Satellite < > Press »OK« and use » «, » «, » « or With SCR satellite system, auto search by » « to pick the satellite you wish to get Λ several users / receivers at the same time the digital stations from and press »OK« to may cause problems. confirm. Press » « (blue) to exit antenna settings. Type If your antenna system incorporates a single cable router multi-switch, use »Grundig SCR« option. Press »OK« or select »Grundig < > SCR« with » « or » «. Select »LNB-Frequency High« with » « and enter the frequency with »1...0« as a five-digit number.
- Page 77 DETAILED CHANNEL SETTINGS ---------------------------------------------------- Select the Channel Type. Antenna settings for digital sat- Press » « or » « to select whether you Λ ellite channels and searching for want to search for only digital channels channels automatically with DiS- (Digital) or only radio channels (Radio) or EqC 1.0/1.1 both (Digital + Radio) and press »OK« to select and mark or unmark the »Digital« Note: and/or »Radio« items. LNB settings described in the following sec- tion require significant expertise on satellite Select Scan Mode. systems. Contact your authorized dealer To select whether you want to scan free digi- about this matter. tal television channels (Free), only encrypt- ed digital television channels (Scrambled) Open the menu with »MENU«. or both (Free + Scrambled), press »...
- Page 78 DETAILED CHANNEL SETTINGS ---------------------------------------------------- LNB Selection Notes: see DiSEqC mode. W hen updating via the same satellites a security query is displayed at the beginning DISEqC Mode of the search. Based on the number of current satellite systems, select »Off«, »DiSEqC 1.0« or T o store them in the previously stored chan- < > < > »DiSEqC 1.1« with » « or » «. nels list, select »Yes« with » « or » «; - » Off«: For satellite systems with single antenna. select »No« to delete the channels and - » DiSEqC 1.0« switch allows for receiving press »OK« to confirm. from four satellites maximum at a time. – T he »Digital Search« menu will appear <...
-
Page 79: Motorized Antenna Settings (Diseqc 1.2)
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Motorized antenna settings Moving Mode Select the Moving mode as »Discrete« or (DiSEqC 1.2) < > »Continuous« with » « or » «. Note: – » Discrete«: Moves the antenna to the west LNB settings described in the following sec- or east for the determined step size. tion require significant expertise on satellite – » Continuous«: Moves the antenna to the systems. Contact your authorized dealer west or east continuously. about this matter. Step Size Your television supports DiSEqC 1.2 motorized < > Using » « or » «, select the number of satellite systems. This feature allows you to con- steps the antenna has to rotate. »Step Size« trol the satellite through your television. -
Page 80: Searching For Television Channels From The Cable Provider Automatically
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Searching for television chan- Note: nels from the cable provider au- You can speed up the search. To do this, frequency and network ID information are tomatically required. You may get this data from your Open the menu with »MENU«. cable operator or find it in Internet forums. < > Use » «, » «, » « or » « to select »Set- Λ Select »Continue« with » « (blue). tings« and confirm with »OK«. Note: > < Select »Source« with » « or » « and press S elect whether to search for digital or »... -
Page 81: Searching For Television Channels From The Cable Provider Manually
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Searching for digital terrestrial Searching for television chan- TV channels automatically nels from the cable provider manually Open the menu with »MENU«. < > Open the menu with »MENU«. Use » «, » «, » « or » « to select »Set- Λ < > tings« and confirm with »OK«. Use » «, » «, » « or » « to select »Set- Λ >... -
Page 82: Searching For Digital Terrestrial Tv Channels Manually
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Searching for digital terrestrial Auto service update TV channels manually If this function is activated, possible changes of network operators are updated automatically. Open the menu with »MENU«. The television must be switched to the stand-by < > Use » «, » «, » « or » « to select »Set- Λ mode. tings« and confirm with »OK«. This update affects all types of reception - terres- > < Select »Source« with » « or » « and press trial, cable and satellite. » « to confirm. Open the menu with »MENU«. Press » « to select »Advanced« and con- <... -
Page 83: Tuning Analog Television
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Tuning analog television Notes: stations After starting the scan, a security query will appear. Press »OK« to confirm the »Yes« This setting is only necessary if you cannot re- option. ceive any digital channels and you have not car- – A ll of your channel and favorites lists in ried out an analog search during initial set-up. the channel list will be deleted and com- The television channel can be set directly or piled again. using the search. – » Analog Search« menu will appear, and the search for TV channels will start. Tuning all analog television channels Depending on the number of television Analog television stations are listed in the chan- channels received, this can easily take a nel list after the digital television stations. few minutes. – T he search is complete as soon as Note: »Search is completed!« appears. -
Page 84: Changing Stored Analog Channels
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Select »Program No« with » « or » « Changing stored analog Λ < > and press » «, » « or »1…0« to select the channels pre-setting. If channels were stored with the auto channel Using » « or » «, select »Band«. To select Λ search during the tuning of the television chan- either »S« (special channel) or »C« (chan- nels, you can delete them. You can also change < > nel) press » « or » «. or enter the name of a channel and skip a chan- nel. Select the channel with » « or » «. To Λ enter the channel number step by step, press < > Selecting channel lists »... -
Page 85: Λ ", " < " Or
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Entering analog channel names (8 char- Select the favorite list you want to add the selected channels with » « or » « and Λ acters maximum) store with »OK«. In the »Channel Editor« menu, select the – Channels are marked with »➡«, »➡«, channel you want to rename with » «, < > »➡« or »➡« in Channel Editor. » «, » « or » «, and highlight it by press- Λ – Y ou can add the same channel in more ing »OK«. than one favorites list. –Channel will be marked with »➡«. – E ach favorite list can contain up to 255 Confirm »Tools« with »... -
Page 86: Displaying Signal Information
DETAILED CHANNEL SETTINGS ---------------------------------------------------- Displaying signal information (only for digital television channels) Open the menu with »MENU«. < > Use » «, » «, » « or » « to select »Set- Λ tings« and confirm with »OK«. > < Select »Source« with » « or » « and press » « to confirm. – » Source« menu will be displayed. Select »Advanced« with » « or » « and Λ press »OK« to confirm. Select »Signal Information« with » « or » and press »OK« to confirm. Λ – » Signal Information« menu will be dis- played. -
Page 87: General Operating Principle Of The Tv
GENERAL OPERATING PRINCIPLE OF THE TV ----------- Block Diagram... -
Page 88: Dc Power Stage
GENERAL OPERATING PRINCIPLE OF THE TV ----------- General Operating Principle of transferred to eMMC flash and main IC. These two main integrated circuits must be checked if Chassis key data or boot software are considered faulty. No external IC is used in URSA mainboard in RAMs are used for the processes performed GF chassis products in contrast to KR chassis within the integrated circuit. and it is combined with the main integrated circuit. Surely, the system should be supplied power in 5V, 3.3V, 1.5V, 1.8V, 1.25V and 1.15V, which is As seen in block diagram, twin-triple tuner sup- required for these processes. port is offered. Two satellite tuners and a single tuner that can receive two different DVB-T/T2/C broadcasts at the same time are used. These DC Power Stage broadcasts are sent to the main IC via a single Chassis and supply unit should be connected demodulator. Signals received from all audio via S900 connector. In GF-chassis products, and video sources provide input to the main only 5V is fed from the supply unit (PSU) in integrated circuit. Image is sent to the panel Stand-By mode (+5V2_ST). 12V and 24V sup- with LVDS/Vby1 lines from the main integrated plies are switched on by the control of main circuit after it has been processed. Likewise, the integrated circuit when television is going out of... - Page 89 GENERAL OPERATING PRINCIPLE OF THE TV ----------- back-lights on or off. This signal is sent from the voltages will be activated on the chassis. 14th pin of S900 connector to the power supply DDR3 RAM and the main IC is supplied with and from there, to panel inverter; the rear lights VCC1V5 voltage, Ursa and the main IC is sup- are switched on if this is higher (3.3V). The 3rd plied with VCC1V18 voltage, tuners, LNB IC, signal is "BRI_ADJ"; it is sent from the 13th pin of audio amplifier, nand flash, the main IC, I2C S900 connector to supply unit, and from there pull-ups, RESET IC are supplied with VCC3V3, to panel inverter. BRI_ADJX signal represents Ursa, LedART cabinets are supplied with 12V DIMMING in our previous chassis; it determines VCC1V8 voltage, while for Eternity cabinets the the brightness level of back-light depending on audio amplifier is supplied with 24V VCC_AU- the value set in the user menu. When BRI_ADJX DIO voltage. is high (3.3V) maximum brightness level is reached. This signal can be a square wave or a DC value according to the panels using PWM dimming and DC dimming. In Stand-By, only +5V2_ST and VCC3V3-ST voltages act on the chassis. As you can see in the electrical diagrams of KT, These voltages are used in core voltage supplies of various modules and ICs in GF. In Stand-By mode, integrated circuits and regulators remain off as long as possible to ensure lower power consumption. In GF-chassis products, Stand-By power consump- tion is below 0.5W. "POWER_SW" signal sent from the main IC makes the device exit the Stand-By mode. With POWER_SW; PSU’s 12V and 24V voltages are...
-
Page 90: Operating Principles Of Cir- Cuit Components
OPERATING PRINCIPLES OF THE CIRCUIT COMPONENTS IC100 Main integrated Besides, the problem might be originated in (IC-SMD software, flash, crystal or RAM. If there is a MSD95M0D BGA TRY) problem, we cannot be sure that it is originated Main integrated circuit IC100's specifications: in IC before checking it out. UHD and FHD support, digital (DVB-T/T2/C) While turning the TV on, main IC switches on and analog broadcasting demodulator, USB the system by reading the flash and turns on the recording feature, Broadcast and A/V decoder power supply by switching the "POWER_SWX" (NTSC/PAL/SECAM), Full HD 50Hz support, signal to high. Then, panel signals "BRI_ADJX" MPEG-2 and MPEG-4 support, 32-Bit Linux (Sets backlight brightness), "TCON_ON" (turns based processor, Audio and subwoofer proces- on Panel TCON board, panel supply) and sor and interface, 1 USB 2.0, 2 USB 3.0, 4 "BL_CTRLX" (turns on backlight) turn on panel HDMI, 6 DDR3 RAM, HEVC H.265 support. backlight and the image appears on TV. IC200,201,202,203 DDR3 RAM (IIC-SMD K4B4G1646E-BCNB FBGA T&R) RAM is the place where the main integrated circuit performs the processes such as decod- ing, encoding, image and video resolution in all... -
Page 91: Ic1000 Audio And Headphone Amplifier
OPERATING PRINCIPLES OF THE CIRCUIT COMPONENTS If any problem occurs in the flash integrated circuit, the chassis will not function because the The integrated circuit of audio amplifier ampli- software in the chassis does not start. As soon fies digital audio data coming from main IC to as the chassis is energized, LED located on the the desired level and sends it out. Gf chassis vol- front panel will start flashing. This means that ume output is 2x15W. For its all products, audio main IC has read and started the software. IF out power is 15 W (8 ohm). As is the case with LED is constantly illuminated but not flashing, KR chassis, there is not a separate circuit for the and the chassis is not turned on even though it headphone socket. Headphone amplifier is in is energized, this means either software was not the audio IC. IC1000 audio amp. is supplied by read due to a problem in flash IC or it could not 24V VCC_AUDIO voltage. be started due to a problem in main IC. IC1302 DC-DC converter (IC-SMD Keys such as HDCP, CI are stored in E-MMC flash in TVs with GF chassis. This is why it is not TPS562200DDCR SOT23-6 T&R) recommended to completely delete the flash. IC1302 is the converter that converts 12 Volt input to Vcc3v3_u (3.3 Volt). Vcc3v3_u supply IC1000 Audio and headphone supplies flash and some main integrated circuit amplifier (IC-SMD TAS5739MDPHPR... -
Page 92: Ic903 Step-Down Dc/Dc Converter
OPERATING PRINCIPLES OF THE CIRCUIT COMPONENTS SMD XC6222B181ER-G USP-6C T&R ) IC704 is step-down converters that allow to obtain VCC1.8V from +VCC3V3. Tuner IC is IC904 is the Step-down converter that allows supplied from here. to obtain VCC3_3V-ST from 5V. IC's to be supplied when TV is off and Main IC supply is made from here. Output of this integrated circuit output is active when TV is in stand-by. When IC output is faulty, chassis does not carry out any operations. Led is not lit. No log is re- ceived. IC909 IC604 IC606 Current Limit- ed power distribution switch (IC- SMD XC8107AC05MR-G SOT23-5 T&R) These ICs are used for voltage switching and current limiting. VCC3V3_FE voltage is obtained from VCC3V3- ST with IC500 and this voltage is used as the supply to the tuner ICs. If this voltage is not pres- ent, no digital broadcasts will be received. -
Page 93: Ic705 Lnb Regulator(Ic-Smd Lnbh26L- Spqr Qfn T&R)
OPERATING PRINCIPLES OF THE CIRCUIT COMPONENTS IC706 Analog-digital tuner inte- gration (IC-SMD Si2151-A10-GMR) IC706 Analog-digital tuner IC has two differ- ent blocks. It communicates with Main IC using I2C protocol. Thus, it locks into two set chan- IC705 LNB regulator nels. Tuner 1 block in IC is used for analog (IC-SMD LNB- broadcast and CVBS mark is sent to Main IC by H26LSPQR QFN T&R) demodulation. Both tuner blocks can be used for This integrated circuit adjusts LNB voltage ac- digital broadcasts. IF signal of desired channel cording to the data received from IC through is sent to demodulator IC. IC700 is supplied by I2C line. High band-low band, vertical-horizon- 3.3V_FET. tal selection, DiSEqC selection are all done ac- cording to the data this integrated circuit sends to LNB. It is supplied 12 V power. IC700,701 Demodulator IC (, IC- IC702 Satellite Tuner (IC-SMD SMD SI21692-C55-GMR QFN T&R) -
Page 94: Service Menu Settings
SERVICE MENU SETTINGS ------------------------------------------------------------------- To enter service menu, just like in the previously R&D stage. This setting must be "Off" on TVs launched products, we press menu button of the delivered to the customer. remote control and enter 9, 3, 0, 1 or 8, 5, 0, 0. PLUG PLAY (Demo Mode): A navigation key is As the chassis improvement and development pressed after having completed all settings and works go on throughout the production, service checks in the factory. Later, "Please wait" mes- menu items may vary according to the software sage appears; and when you see the message version. The following explanations are service "DONE", the device should be unplugged and menu settings of the current version. plugged again. With this process, television will be set to its initial values before delivery. It will be proper to set Plug&Play tab after service. System Configuration After pressing right key on the tab, the flash will be installed with factory defaults. TV can be This menu contains general settings of the sys- shipped to the customer after this setting. Please tem. Press OK button on the remote control to note that any warning is not displayed or you access this menu. do not have to exit the menu while Plug&Play is getting activated. You should be careful not to take the device into Plug&Play mode by mistake. HOTEL tab should be set to "On" with the products for which the Basic Hotel TV feature is desired; and it should be set to "Off" in other products. When the hotel model is "On", certain features designed for the hotel use are activat- ed; the user cannot change the channels set by the service, for example, or the volume cannot be increased more than a certain level. -
Page 95: Source Configuration
SERVICE MENU SETTINGS ------------------------------------------------------------------- CI+ feature is standard in all the products with GF chassis. PANEL ENERGY CLASS header is used for selecting the energy class of the product. Prod- uct is set to specifications in the factory. Panel brightness levels available in the NAND Flash are used according to the product energy class. RECOVERY MODE is used for R&D test pur- poses, here ON must be selected. Source Configuration OSD Selection menu has "Grundig", "Beko", This menu can be accessed by pressing 2,3,5,6 "Arçelik" and "OEM" selection. For Grundig on the remote control. The settings under source products, "Grundig" is selected. Menu images configuration tab determine which sources will vary according to selected brand. be on and which ones will be off depending on GRFset1 (USB RECORDING): This indicates customer demands. PC source cannot be se- the television's status of USB recording. In GF- lected in gf-chassis products as they do not have chassis products, it is selected ON by default. It VGA connector. will be off in Non-pvr products. The Remote Control: GRUNDIG and other OSD can support several different models of re- mote controls and all those models can be seen under the menu. Selection of remote control may vary according to the customer demand. Operator Selection: Approved operators are selected as "Avail" and others as "Navail". Keypad: This item indicates the type of the key- pad incorporated in the chassis. 3Button+1STD is selected by default in the GF-chassis products. - Page 96 ------------------------------------------------------------------- Speaker Output Power: Allows selecting chassis products, audio output power should be speaker output power. Speaker volume output selected “OFF” by standard. power must be selected as "15W@8ohm". Hidev Mono (Enhancing high audio devia- Subwoofer Output Power: Carries out sub-woof- tion): HIDEV MONO is a feature developed to er volume output. prevent imbalances that may occur on sound carrier signals due to high audio deviation in the country. It is ON for domestic products and OFF for the products sold abroad. Optical Out (Digital Optical Audio Output): This feature is generally used to input digital audio to devices such as amplifier, DVD and etc. Optical out must be set to ON by default in GF chassis products. Sports Mode: This has been developed for the TVs with Grundig sports feature. It is switched to "Off" in GF chassis products. EPG Padding Time: It can be set to the early start or delayed end during pvr set-up, accord- ing to the program on epg table. It must be off in non-pvr products. BISS Key: This is developed for decryption when broadcast is scrambled over satellite with- out using modules. It should be selected "On" for GF-chassis products. Voice Recognition RC: This is for remote con- trol operated by voice recognition. HbbTV: This enables HBBtv feature. It should be switched to "On" by standard in GF-chassis products. Power LED Brightness Low: This is the value that adjusts LED brightness when TV is On. It must be set to "8" in GF chassis products. Power LED Brightness High: This is the value that adjusts LED brightness when TV is off. It is set as "23" in GF products.
-
Page 97: Cloner Configuration
SERVICE MENU SETTINGS ------------------------------------------------------------------- WiDi: It must be set to off as certification tests Cloner Configuration (Cloning are still in progress. feature configuration) This menu is used to copy your selections, chan- nel lists, user options, satellite settings and ser- vice menu settings on TV and move them to another TV. Particularly, when installing TV at the user's home, this feature will save us time as we will not have to tune satellite channels anew. Cloning can be done from any TV with the same chassis. To enter this menu, you need to go to "Cloner configuration" from the service menu and enter the numbers 4, 6, 5, 8 in sequence. Jitter Immunity: This is added for test purposes. It must be set to off. Uart Enable: It must be set to Off as it is used for internal tests. APP PIP: It must be set to "Off" till the tests are finalized. Screen Capture allows to capture and then share the screen image in the live broadcast. It should be set to "On". DTS Cert Mod must be set to "Off" till tests are finalised. Copy selects what and to where you want to Bluetooth provides wireless communication copy. TV to USB copies the configuration on with sound systems with Bluetooth feature. It TV to the USB. USB to TV transfers previously must be set to On. prepared channel list, user and satellite settings Ambient Light Sensor, adjusts back-light level to TV. -
Page 98: Acoustic Management
SERVICE MENU SETTINGS ------------------------------------------------------------------- Approved Logos This refers to logos and approved countries that will be on the screen when SHOP MODE is selected in the product. The tab includes "Country Approvals" and "Feature Approvals". Other Menus Other menus are closed to services as they are used for R&D studies in the factory. Start Cloning option starts the cloning process. Whereas TV to USB takes little time, USB to TV causes a short interruption of TV imaging. When TV automatically restarts after installation, its means cloning is completed. WARNING When cloning, you should ensure that both product codes are the same. If the cloning will be carried out for two products having the same product code, during both TV to USB cloning and USB to TV cloning, "ALL" should be selected as Copy item. When cloning between different product codes, only "My Channel List" section should be copied. After copying, picture settings of TV may show some differences. TV should be delivered to the customer after those settings are checked. On User menu, go to "Source Setup" (without selecting). Press the keys 4, 6, 5, 8; and cloning menu will be displayed. Acoustic management This feature is used to create the best sound performance suitable for the cabinet. Bass/... -
Page 99: Customer Settings
CUSTOMER SETTINGS ------------------------------------------------------------------------------ Customer settings vary depending on the prod- chassis products for any reason at the service uct code and model. In GF-chassis products, center, relevant settings should be performed many of the features are selected ON by DE- in service menu by re-checking the tables be- FAULT. low and VTF of the product before delivery to the customer because the values in the tables The values of each feature are shown in the next below will take default values on software in column of the table. The values of optional fea- accordance with the product size (screen) and tures are stated in VTF (Version Demand Form) features!! depending on the customer’s demand. Customer settings are not changed when soft- ware or bootcode is installed. Note: Following settings may vary according to software versions. !! If flash IC is required to be changed in GF- DIVISION FEATURES SETUP VALUE TO BE SELECTED TV Mode Standard Customer HDCP Verify Standard Success Debug Mode Standard Plug Play Standard Hotel Optional... - Page 100 CUSTOMER SETTINGS ------------------------------------------------------------------------------ OSD Selection Optional Must be set according to VTF. GRFSet1 Optional Must be set according to VTF. It must be set to "On" in prod- ucts with PVR and "Off" in products with Non-PVR. Remote Control Optional Must be set according to VTF. Operator Selection (Fransat) Standard Avail Operator Selection (Turksat Standard Navail Fast) Operator Selection (D-Smart) Standard Navail Operator Selection (UPC) Standard Navail Operator Selection (YouSee) Standard Navail Operator Selection (Canal Standard Navail Digital) Operator Selection (Cable Standard Navail Ready) Operator Selection (Ziggo) Standard Navail Operator Selection (Com...
- Page 101 CUSTOMER SETTINGS ------------------------------------------------------------------------------ Optical Out Standard Sports Mode Standard EPG Padding Time Optional Must be set according to VTF. "On" will be selected for products with PVR and "Off" in others. BISS Key Standard Voice Recognition RC Standard HbbTV Standard Power LED Brightness Low Standard Power LED Brightness High Standard Permanent Timeshift Standard Language Selection Optional Must be set according to VTF. WiDi Standard Jitter Immunity Standard Dual CI Standard Uart Enable Standard Twin Mode Recording Standard Dual Watching Standard APP PIP Standard Screen Capture...
- Page 102 CUSTOMER SETTINGS ------------------------------------------------------------------------------ MPEG4 Boxer Standard Riks TV Standard Canal Digital Standard TNT HD Standard Com Hem Standard Cable Ready Standard Antenna HD Ready Standard YouSee Standard Standard Ziggo Standard MediaSet Standard Levira Standard Spain TDT Standard Stofa Standard Digiturk Standard ORF Austria Standard Standard CanalPlus Standard CanalReady Standard EvoTV Standard D-Smart Standard...
-
Page 103: Chassis Dc Socket
CHASSIS DIAGRAMMATIC IMAGES -------------------------------------- Chassis DC Socket VCC DDR ENGLISH... - Page 104 CHASSIS DIAGRAMMATIC IMAGES -------------------------------------- ENGLISH...
-
Page 105: Terrestrial Tuner
CHASSIS DIAGRAMMATIC IMAGES -------------------------------------- Terrestrial tuner Satellite tuner ENGLISH... -
Page 106: Usb
CHASSIS DIAGRAMMATIC IMAGES -------------------------------------- ENGLISH... -
Page 107: Failure/Error Analyses
FAILURE/ERROR ANALYSES ------------------------------------------------------------- Sound available but no picture, and back-lights illuminated In this section, we will basically explain where most likely that picture information is transmitted we need to check if there is "no picture on TV" as well. Even if we do not have any precise con- even though there are not any problems in trol method for information flow over data lines, the panel inverter. Here, we are assuming that the voltage is around 1.2V DC as detected by chassis is generally in good condition as we means of a measuring tool. If this voltage cannot obtain sound output from TV. When you cannot be received, main processor might be faulty. determine if the back-light is working or not due If LVDS data leaves Main Processor without to the illumination level in the environment, you problems, problem might be in panel. are recommended to tap on the TV's front panel Besides, you can also consider problems includ- lightly; if the back-light is working, you will no- ing that LVDS data is not being transmitted to the tice a slight glowing. panel properly, i.e. panel parameters are wrong Before starting controls and repairs, it is cru- in NAND Flash or software installation error. cial to analyze and comprehend the problem Problem can be eliminated by installing the ap- exactly. In this problem, you must make sure if propriate software. it is originated from the utilized source, if it is a cable connection error or if utilized devices have any problems or not. - Page 108 FAILURE/ERROR ANALYSES -------------------------------------------------------------...
-
Page 109: Sound Available But No Picture, And Back Lights Not Illuminated
FAILURE/ERROR ANALYSES ------------------------------------------------------------- Sound available but no picture, and back-lights not illuminated In the cases where audio is available yet the back-lights are not lit, first of all, check the cable and connector connections to the panel. After the connection checks are completed, check whether 12V is present on the 4th pin of the chassis S900 connector. PSU must be changed if 12V cannot be measured on this pin. If 12V voltage is present, check the 13th pin of the S900 connector on the chassis. If the BL_CTRL signal is 0V on the 13th pin, it indicates that there is a problem originating from software or IC. If the voltage measured on this pin is 0V, for test purposes connect 3.3V to the S900 con- nector of the chassis PSU cable which is located on the chassis side. If the TV does not operate, then there may be a problem originating from LED or driver. First replace the LED driver circuit then the panel if the problem persists. If the TV operates, increase the backlit to the maximum and install a different version of software and try again. To make sure that system works, turn back light down to the lowest level and check. If no problem occurs, submit TV. - Page 110 FAILURE/ERROR ANALYSES -------------------------------------------------------------...
- Page 111 FAILURE/ERROR ANALYSES ------------------------------------------------------------- No audio In case of any audio problem, not only one but Audio amplifier has I2C communication lines to also various sources, cables and devices should communicate with the main integrated circuit. be checked against the problem. You need Roughly, the voltage level should be below to make sure that volume has not been turned 3.3V and variable at the Pins 23 and 24. Here, down from television settings or mute button is the fixed 3.3V gets lower when data is being not pressed. transmitted, and thus, audio amplifier and main integrated circuit communicate. If this value is If there is not any problems, check the loud- constantly 0V, short circuit possibility should speaker cables and loudspeakers on the chas- be checked where I2C line is connected. Cur- sis; fix the problem, if any. rent version of the software should be installed Before starting detailed checks, check if sound against software problems. problem is caused by headphone out. As head- phone amp. is in sound amp., setting can be en- abled or disabled in service menu and you can check if the problem is caused by headphone amp. If no sound is received from Sound IC out, an oscilloscope can be used to check data lines I2S and I2C in input. If no signal is observed, then there is a problem on the main integrated circuit. If signals are detected, you should check IC800 and peripheral components against problems, and check IC800 supply and see if MUTE is pressed on. Besides, scart output of TV should be checked for sound. If there is no sound in scart output, power supply of the integrated circuit at posi- tion IC600 and peripheral components, and at IC600 input, the availability of AU_DAC2_L...
- Page 112 FAILURE/ERROR ANALYSES -------------------------------------------------------------...
-
Page 113: Updating Software And Boot From The User Menu
SOFTWARE UPDATE ------------------------------------------------------------------------------------ Updating TV Software by using Updating software and boot USB memory from the user menu To update TV software by means of USB memo- If the TV can be turned on normally, the soft- ry, we will use Target_GF folder available in the ware update must be performed accordingly. system according to product code. Open the TV menu. Enter the service menu First, copy Target_GF folder to USB main direc- with 8500 or 9301. Select Boot Code Configu- tory. Before starting installation, you should ration and press "OK" on the remote control. check script, image and panel files in the Install the boot update and the TV will be Target_GF folder which will be installed. The switched on automatically. content of Target_GF folder to be transferred to USB disk main directory should be as shown below. Open the TV menu to update the software. In products with GF chassis, in order to down- load software, turn off the TV before inserting the USB to the TV. (Disconnect the power) Plug USB into the TV; press middle key of the joystick in products with joystick and plug in the Hold down the key until you see that code installation has started. -
Page 114: Updating The Panel File
SOFTWARE UPDATE ------------------------------------------------------------------------------------ Start updating by selecting USB from the Soft- ware Updates menu. Locations where required keys are stored SOFTWARE MEMORY TO LOAD THE SOFTWARE ID DATA Main Software Chassis Serial No Once the software update is completed the Product Serial No TV will be switched off and then on by itself. Acoustic Updating panel file Mac Address The content of BIN_FILES folder should be as shown below. Appropriate panel file will be Panel selected from GF_PANELLER.rar in the WEB HDCP Key folder. The file in the Panel files folder will be HDCP TX Key copied and pasted in the keys folder. SSL - Secure Sock- et Layer Gamma Boot Software HDMI EDID Reso- NAND Flash/Main IC lution and audio info... -
Page 115: Teraterm Usage
SOFTWARE UPDATE ------------------------------------------------------------------------------------ TeraTerm usage Port to be selected in Teraterm during port selection; when mstar isp tool (software instal- In case of possible locking that may occur on lation tool) is connected to pc using USB, the television, failure to detect prompts from "USB serial port (Com#)" value is displayed in controller and/or keypad, failure of LED light to "ports(COM&LPT) under "device manager" tab. blink or when the TV cannot be turned on com- If "usb serial port (com#)" line cannot be seen pletely, Teraterm must be used to observe "core here, it means that software uploading appara- dump" errors that may occur. Printout showing tus installation could not be done properly. software status in *.txt format can be taken and even examined. TeraTerm software can be pro- vided from under the relevant product software Receiving LOG folder in the E-Library. File → Log… is selected from the drop down menu. TeraTerm installation; Install TeraTerm.exe program on your PC. Once the program is opened, Set-up → Serial port...is selected for port settings. Name and place of file to be saved is deter- mined in the opening window. Once the "Open" key is pressed, writing on the file starts. Window in the picture opens on the screen. Port selection is performed and OK is pressed. Thus, program is started for printing. -
Page 116: Hotel Tv Setup
HOTEL TV SETUP ---------------------------------------------------------------------------------------------- Hotel TV is intended to prevent hotel guests from changing TV’s channel settings and turning vol- ume up to disturbing levels for the environment. Therefore, "Source Setup" tab is not shown in user menu. Check whether the "Hotel TV" option under the System Configuration tab in Service Menu is "On" to perform the desired settings in HOTEL TV. If the "Hotel TV" tab is ON in the service The channels are tuned and favorite list is menu, then we must open the "Hotel TV Settings" determined over source setup. In customer menu and log in as "Admin" to perform any mode, TV is turned on at the channel and source operation in this menu. where it was turned off in admin mode. This feature should be used to set TV’s opening chan- nel. As an opening channel, you may set the hotel's own advertisement channel with hotel's videos or a channel advertising paid broad- casts. In customer mode, it is not an error that TV is turned on at the same source and channel whichever channel or source was open when turning off the TV. You should consider this issue before switching TV to Stand-By in Admin mode. When setting up an Hotel TV, the easiest and most convenient way is to perform all settings on a single TV and copy the same configuration to other TVs by means of cloning feature. Here, you should make sure that TV is turned off at the intended channel after completing set-up at the admin mode. "Cloner Configuration" menu has to be opened in order to use the cloning feature from the USB. Cloner Configuration menu can be Open the user menu by pressing “Menu”... -
Page 117: Glossary
GLOSSARY -------------------------------------------------------------------------------------------------------------- Varies depending on the TV model. DLNA Digital Living Network Alliance is an interna- tional agreement between manufacturers of With ARC (Audio Return Channel) the audio consumer electronics, IT hardware and mobile signal of the television program can be played telephones. The agreement aims to ensure per- back via a HDMI cable or an optical cable with fect communication between IT devices in the a multi-channel amplifier. home and personal use sector. This means that you can access released data in your network Back-light very simply via the Grundig LED TV remote Manual setting for back lighting (only active if control and play it on the TV – without laborious dynamic back lighting is switched to "OFF"). This connecting of USB drives or burning DVDs. setting also directly impacts power consumption. Domain name system Block Noise Reduction The domain name system (DNS) is one of the This function can only be selected with digital most important services on the Internet. Its main reception sources and AV pre-sets. It reduces function is to convert an Internet address into the any interference from artefacts (pixel blocks) corresponding IP address. from digital programs due to MPEG compres- DTS Studio Sound™ sion (such as from DVB-T receivers and lower transmission rates or DVD players). - Page 118 GLOSSARY -------------------------------------------------------------------------------------------------------------- Dynamic Contrast Gateway This function dynamically and optimally adjusts A gateway allows networks, which may be the contrast for the respective picture content by based on completely different protocols, to analyzing images and then altering this depend- communicate with each other. In the home area, ing on a change in contrast. This increase in the a combination of the router and the DSL modem contrast however may also reduce the visible are used as an Internet gateway. brightness levels in the picture. Hardware version Film mode Hardware in this context means the device. Detects and processes feature films automati- This includes all components such as processor, cally for all channel sources. This means you will display, etc. always receive an optimal picture. HbbTV This functions in the mode 480i, 576i and 1080i HbbTV is the interactive successor of video text, in TV playback and for other channel sources. which has content with a modern design, high If the "Film mode" is switched on for programs resolution images and video sequences as well without a feature film signal, minor problems as media libraries. such as picture freeze, defective subtitles or fine lines in the picture could occur. For full functionality of HbbTV, the TV must be connected to the Internet. Firmware version HD/Full HD/UHD Firmware is the term used for software that is embedded in a programmed chip (micro-con-...
- Page 119 GLOSSARY -------------------------------------------------------------------------------------------------------------- LIVE SHARE a device/host part. It is used in IP networks to make routing decisions. With Live Share all content between Widi™/ Miracast™ certified mobile devices (smart Network name (SSID) phone or tablet) and PC and the television can The network name (SSID – service set identifier) be streamed via WiFi. HD contents can also be is the term used for the identification of a wire- streamed without any difficulty on the television less network that is based on IEEE 802.11. Every and naturally TV contents can also be trans- wireless LAN has a configurable SSID, which ferred to mobile devices/PC. uniquely identifies the wireless network. The character sequence of the network name can be up to 64 characters in length. It is configured Low Noise Block is located in the center of in the base station (access point) of a wireless a parabolic antennae. LAN and set on all clients which access it. E.g. It implements the satellite frequency from e.g. 10.7–11.75 or 11.8–12.75 GHz in the Noise Reduction range 950–2150 MHz and enables cable Reduces the visible snow by displaying the transmission through a coaxial cable (and picture a little less sharply and creating a slight recently also with fiber optic cables) and recep- blurring. It should therefore be used minimally tion with a satellite receiver. provided that a good picture material is present. MEMC Perfect Clear Improves the display of moving images through Improves the general image by means of a...
- Page 120 GLOSSARY -------------------------------------------------------------------------------------------------------------- Proxy server digital transmission technology. A proxy or proxy server is a service program for Time shift computer networks that administers data trans- You can pause a program that you are watch- fer. It makes data transfer faster, and can also ing. This is a useful function. For example if the increase security by implementing access control telephone rings while you are watching a film mechanisms. The transfer is conducted between and you do not want to miss anything. computers or programs in computer networks. On the server side, the proxy acts as a client; on The program is saved in the Time Shift memory the client side, it acts as a server. of the external data volume. A maximum of 60 minutes of the current Router program can be recorded in the Time Shifter A router is a network component that links sever- memory. al computer networks. Router analyzes (on the basis of layer 3 information) the network pack- Transponder ages of a protocol it receives and forwards it to Gathering of various transmitters on a fre- the intended destination network. Conventional quency. routers work on layer 3 of the application layer. A router has an interface for every network con- USB Recording nected to it. When data is received, the router Enables recording and playback of digital determines the correct path to the destination television programs (DVB-S, DVB-T and DVB-C).
Need help?
Do you have a question about the POWERMAX Q2 and is the answer not in the manual?
Questions and answers