XINDAK CS88 Instructions Manual

Vacuum tube amplifier

Advertisement

®
INSTRUCTIONS
CS88/CS300
Vacuum Tube Amplifier

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS88 and is the answer not in the manual?

Questions and answers

Summary of Contents for XINDAK CS88

  • Page 1 ® INSTRUCTIONS CS88/CS300 Vacuum Tube Amplifier...
  • Page 2 Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste There is a separate collection system for these products. A Information on Disposal for Users private household 1.
  • Page 3 Chapter 1 Important Safety Instruction Dangerous Voltage The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to presence of uninsulated “Dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
  • Page 4 22. Never operate this product in an explosive atmosphere. Check Accessory Unpack your CS300/CS88 Vacuum Tube amplifier and keep all packing materials for future transport or service, locate and remove all accessory items from the accessory box within the controller shipping carton.
  • Page 5 Chapter 2 Introduction Appearance Warm up Indicator When the device enters warm up state this indicator lights Power Button When turn on any one of the power buttons the warm up indicator lights that means this device enters warm up state When turn on the other power button the operation work indicator lights also that means the device enters normal working state...
  • Page 6 Chapter 3 Introduction Operation Instruction Operation flow of this product: 1.Connect this amplifier with other equipments before power on; After checking all of the equipments have been connected well turn the volume knob to the minimum position and then get through the power supply Turn on any one of the power buttons then the warm up indicator lights After seconds turn on the other power buttons, and the operation indicator lights.
  • Page 7 Specifications Chapter 4 Specifications Specifications CS88 CS300 1 W(THD 5%) Power output W(THD 4.5%) 50kΩ Input impedance 50kΩ 4Ω,8Ω Output impedance 4Ω,8Ω Hz-20KHz Hz-30KHz Frequency response 0. % Distortion 0.25% 0 mV Input sensitivity 260W(full loading output) Power Consumption 390W(full loading output)
  • Page 8 No.126, Section 2, East 1 Round Chengdu, Sichuan, China P.C. 610051 You can find your nearest authorized distributor and more product information on our website: www.xindak.com...

This manual is also suitable for:

Cs300

Table of Contents