Related Manuals for Living Spaces SEDONA 4710
Summary of Contents for Living Spaces SEDONA 4710
- Page 1 7030-00355 KIT MAS90: 5043-43190 7109TWR WRANGLER/HIGH SIERRA QTY: DESCRIPTION: 1/4 X 4 HEX LAG BLK 3/16 USS FL WASHER BLK 6 X 1 1/4 PHIL FLAT PARTICLE BOARD SCREW 1/2 X 3 FLUTED DOWEL...
-
Page 2: Tools Required
Electric driver with 7/16” socket 20-1 1/4" Wood Screws Make sure you have all parts before beginning assembly. If you need a part, contact Living Spaces Attach two mattress rails(E) to two bottom end assemblies(C) with 8 lag bolts and 8 washers, and tighten. -
Page 3: Safety Warning
00700 SAFETY WARNING Our Bunk Beds have been tested by an Independent Laboratory and are certified to be in compliance with: ASTM F-1427, “Standard Consumer Safety Specification for Bunk Beds” and U.S. Government specifications 16 Code of Federal Regulations, parts 1213 and 1513. SAFETY WARNINGS 1. - Page 5 7030-00205 KIT MAS90: 5043-43381 TRUNDLE BED HARDWARE QTY: DESCRIPTION: CASTERS WITH INSERT ANTIQUE BRASS KNOBS 1 1/2" SCREWS 4 - Antique Brass Knobs 4 - 1 1/2" Screws...
- Page 6 7030-00335 TRUNDLE BED 4466 SEDONA 28 7/8" 28 7/8" 39" 1/2" PARTS LIST: TOOLS REQUIRED: Assembled Caster Frame Phillips Screwdriver Bunkie Mattress 4 Casters w/ Metal Stem 4 Black Plastic Caster Inserts ASSEMBLY INSTRUCTIONS: NOTE: Make sure you have all parts before beginning assembly. If you need a part, contact the dealer where you purchased your bed.
-
Page 7: Parts List
4453 7030-00420 STAIRWAY CHEST WITH BUNK BED The stairway chest has been designed for use as a free standing unit. However for your convenience, if you desire to attach the stairs to your bunk bed we have included four 2" angle brackets. We recommend using these to attach the top center side vertical of the stairway unit to one or two of the end cross members or side rails of the bunk depending on how you position the stairway.