Advertisement
LED Flush Mounts
MODEL
1101-5WH | 1102-7WH | 1103-9WH
INSTALLATION GUIDE
Surface Mounting Installation
4"/5" Junction Box
1.
1. Turn OFF the power supply and fix the mounting bracket on the junction box
2. Connect the LED body wires with power cord
3. Push it towards the ceiling, and at the same time rotate it as direction of arrow, tightly fix the body and the mounting bracket
4. Turn ON the power supply, if it normally light up, installation completed
Embedded In Installation
6" Can
1.
1. Fix the can installed spring with bracket, then fix the bracket with LED body
2. Connect the LED body wires with power cord
3. Squeeze the spring inward as shown and put it at the corresponding position in the can, push the body into the can.
Lightly sway the body to ensure it is reliable installation
4. Turn ON the power supply, if it normally light up, installation completed
info@ortechindustries.com
www.ortechindustries.com
2.
2.
13376 Comber Way
Surrey BC V3W 5V9
3.
3.
375 Admiral Blvd
Mississauga
,
ON L5T 2N1
Instruction Manual
4.
4.
1-888-543-6473
1-888-541-6474
Advertisement
