Table of Contents
Advertisement
Troubleshooting
If you experience problems with your TV, check below for advice. If you don't find a solution here, contact After Sales Support on 1300 002 534.
Problem
Make sure that the batteries are installed with their poles (+/–) in the correct direction.
Remove any obstacles between the remote control and remote control sensor on the TV.
The remote control
Check if the power indicator at the bottom of the TV blinks when you press the remote's power button.
does not work
If it does not, replace the remote control's batteries.
Try pointing the remote directly at the remote control sensor from 1.5-1.8m away.
Make sure that the AC power cord is securely plugged into the wall outlet.
Check the wall outlet is turned on and the power indicator at the bottom of the TV is lit.
The TV won't turn
If using a multi-outlet, check if it is working properly. To check whether a power strip is working properly, plug the
on
TV's power plug directly to a wall outlet and observe its operation.
Try to power on using the power button on the TV.
Ensure the antenna cable is securely connected to the TV and to the wall outlet.
Ensure the input source is set to DTV.
If "No Signal" is displayed, Press the
There is no picture/
If some channels are missing, Press the
sound or distorted
Digital Channel Tuning.
picture/sound in
Try a different antenna cable or another TV if possible.
DTV mode
Move the TV away from electronic equipment or devices that could cause interference.
Adjust the antenna position.
If the picture appears fuzzy or blurry, select High Definition (HD) channels or programs.
Solution
button >
Setting > Broadcasting > Auto Tuning.
button >
Setting > Broadcasting > Expert Settings > Manual Scan >
TROUBLESHOOTING | 33
Advertisement
Table of Contents
